Walnut blasting problem

asquared · 03-01-2017, 09:17 PM

Like mentioned, you bump the starter until you see the valve is closed. When taking off the manifold, some valves will already be closed. You would clean those first, then bump the starter to close the other ones. I have a video on YouTube showing how to use the starter trigger switch if you are unsure of how it goes. Just search N54 starter switch or something along those lines. I use the same username

1QwkEvo · 03-02-2017, 02:07 PM

Quote:

Originally Posted by MysticRob

I will fill the gas tank with walnut shells so the injectors can shoot them out and clean the piston tops.

The I'll reverse the intake and exhaust sides so those same walnut shells will be expelled past what USED to be the intake valves, hence cleaning them as they blow by.

Genius. Patent pending. Come to my seminar, you make lots of money. Your friends are losers.

LMAO!!!!

03-01-2017, 09:17 PM	#23
asquared E39 134 Rep 286 Posts Drives: 2000 540i Join Date: May 2016 Location: Las Vegas, NV iTrader: (0)	Like mentioned, you bump the starter until you see the valve is closed. When taking off the manifold, some valves will already be closed. You would clean those first, then bump the starter to close the other ones. I have a video on YouTube showing how to use the starter trigger switch if you are unsure of how it goes. Just search N54 starter switch or something along those lines. I use the same username
	Appreciate 0 Quote