Changed turbos recently... now need to change again

SE7EN335 · 03-06-2017, 10:07 PM

So about 8 months ago I ordered some Hexon RR600s from Hexon and installed them with a ECS tuning turbo installation kit. A short time later as we all know Hexon went under and even though my RR600s are running fine, I still want to swap them into Pure Stage 2s in the very near future for reliability and warranty purposes (don't really want to go hard out and go with a custom ST). If I swap out my Hexons for PS2s, would I need to buy and install the turbo installation kit with the new PS2s even though the turbo gaskets and o rings etc etc were already replaced less than a year ago.

madmantwo · 03-07-2017, 02:57 PM

Seems like it would be worth replacing them for peace of mind, given that you're already spending thousands on turbos + installation. But I personally don't know what kind of condition they would be in after a year

Underground6t9 · 03-07-2017, 03:37 PM

Pay now or pay more later.

ZeeVaughn · 03-08-2017, 02:33 AM

Mmp has a group buy going on for stage 3's maybe hop on that and be done with it

bradsm87 · 03-08-2017, 03:48 AM

That seems silly. Will you swap out the PS2s when the warranty runs out on them for some new ones so you have a new warranty again? And again when that set's warranty is out so you have a warranty forever? Why not just swap them for Pures IF they ever fail, which there is a good chance that will be never, then you'll never have to pay again?

Your turbos have already lasted 8 months without issue so there are no major manufacturing/machining issues with them. Just look after them and don't overspeed or overboost them and change your oil regularly.

whyzee125 · 03-08-2017, 03:54 AM

I'd just run them. It's not worth the install costs to swap them out when there's a good chance they'll be working fine for quite some time.

titium · 03-08-2017, 03:54 AM

Quote:

Originally Posted by bradsm87

That seems silly. Will you swap out the PS2s when the warranty runs out on them for some new ones so you have a new warranty again? And again when that set's warranty is out so you have a warranty forever? Why not just swap them for Pures IF they ever fail, which there is a good chance that will be never, then you'll never have to pay again?

Your turbos have already lasted 8 months without issue so there are no major manufacturing/machining issues with them. Just look after them and don't overspeed or overboost them and change your oil regularly.

^ this

BSM n54iS · 03-08-2017, 06:16 AM

^ +2

Save up for the PS2's, but no need to throw out perfectly working turbos atm.

And yes I would definitely replace with new o-rings, gaskets etc. Working in the oilfield I make it a habit now whenever I remove anything that has a sealing surface I replace with a new gasket/o-ring...everytime. Such a cheap fix for a potentially catastrophic problem

SE7EN335 · 03-08-2017, 04:30 PM

SE7EN335 · 03-09-2017, 03:07 AM

Quote:

Originally Posted by FCobra94

HAHAHAHA fucking love walking dead memes!!!

SE7EN335 · 03-09-2017, 03:09 AM

Just been hearing a lot of horror stories with the RR600s and 700s, seeing as its common for the turbo shafts on them to crack with repeated spirited driving. That's why Ive been wanting to change them for PS2s but yeah I'm likely now to just ride it out till they fail, however that long that may be. It most possibly will last till I sell off the car.

bradsm87 · 03-09-2017, 04:40 AM

Quote:

Originally Posted by SE7EN335

Just been hearing a lot of horror stories with the RR600s and 700s, seeing as its common for the turbo shafts on them to crack with repeated spirited driving. That's why Ive been wanting to change them for PS2s but yeah I'm likely now to just ride it out till they fail, however that long that may be. It most possibly will last till I sell off the car.

I haven't heard of shafts cracking, only smoking almost immediately after installation. I'm loving my RR600s after 9 months so far.

SE7EN335 · 03-09-2017, 05:05 AM

Quote:

Originally Posted by bradsm87

I haven't heard of shafts cracking, only smoking almost immediately after installation. I'm loving my RR600s after 9 months so far.

Hills Eurohaus's 135i RR700s turbo shafts shattered after 6 months of use. Same as one of their customers' RR600s which had both turbo shafts shatter after a few months of use.

Loving the RR600s as well. Spools almost identical to stock, yet has a lot more mid range and top end torque.

Supra2k6 · 03-09-2017, 11:04 PM

It wouldnt make sense, but if you do id take them off your hands just pm me

mojobmw_e90 · 03-09-2017, 11:08 PM

I'm at 1.5yrs on my hexons and no issues knock on wood

03-06-2017, 10:07 PM	#1
SE7EN335 Major 382 Rep 1,066 Posts Drives: 2022 M3 XDrive, 2023 IX M60 Join Date: Aug 2015 Location: Sydney, Australia iTrader: (1)	Changed turbos recently... now need to change again So about 8 months ago I ordered some Hexon RR600s from Hexon and installed them with a ECS tuning turbo installation kit. A short time later as we all know Hexon went under and even though my RR600s are running fine, I still want to swap them into Pure Stage 2s in the very near future for reliability and warranty purposes (don't really want to go hard out and go with a custom ST). If I swap out my Hexons for PS2s, would I need to buy and install the turbo installation kit with the new PS2s even though the turbo gaskets and o rings etc etc were already replaced less than a year ago.
	Appreciate 0 Tweet Quote

03-07-2017, 02:57 PM	#2
madmantwo Second Lieutenant 94 Rep 233 Posts Drives: 2010 e92 335i Join Date: Nov 2015 Location: Seattle iTrader: (1)	Seems like it would be worth replacing them for peace of mind, given that you're already spending thousands on turbos + installation. But I personally don't know what kind of condition they would be in after a year __________________ 2010 BSM 335i 6MT M-Sport w/ MMP Stage 3 Turbos
	Appreciate 0 Quote

03-07-2017, 03:37 PM	#3
Underground6t9 Lieutenant Colonel 317 Rep 1,735 Posts Drives: BMW 335xi, Lexus is250 Join Date: Jan 2014 Location: Eugene, OR iTrader: (2)	Pay now or pay more later. __________________ \|instagram@underground6t9\|
	Appreciate 0 Quote

03-08-2017, 02:33 AM	#4
ZeeVaughn Second Lieutenant 86 Rep 207 Posts Drives: E92 335i 6MT SG/Coral Join Date: Jul 2016 Location: Norcal iTrader: (0)	Mmp has a group buy going on for stage 3's maybe hop on that and be done with it __________________ Remember the buster
	Appreciate 1 whyzee1252007.00 Quote

03-08-2017, 03:48 AM	#5
bradsm87 Lieutenant Colonel 603 Rep 1,693 Posts Drives: F25 LCI xDrive30d Join Date: Jun 2013 Location: Australia iTrader: (0)	That seems silly. Will you swap out the PS2s when the warranty runs out on them for some new ones so you have a new warranty again? And again when that set's warranty is out so you have a warranty forever? Why not just swap them for Pures IF they ever fail, which there is a good chance that will be never, then you'll never have to pay again? Your turbos have already lasted 8 months without issue so there are no major manufacturing/machining issues with them. Just look after them and don't overspeed or overboost them and change your oil regularly.
	Appreciate 3 titium330.00 whyzee1252007.00 Quote

03-08-2017, 03:54 AM	#6
whyzee125 Brigadier General 2007 Rep 4,031 Posts Drives: Dinan stage 2 335i Join Date: Jul 2014 Location: Chattanooga Tn iTrader: (0)	I'd just run them. It's not worth the install costs to swap them out when there's a good chance they'll be working fine for quite some time.
	Appreciate 0 Quote

03-08-2017, 06:16 AM	#8
BSM n54iS Brigadier General 2683 Rep 4,203 Posts Drives: '11 335is \| '16 Macan Turbo Join Date: Aug 2015 Location: Everywhere and Nowhere iTrader: (7)	^ +2 Save up for the PS2's, but no need to throw out perfectly working turbos atm. And yes I would definitely replace with new o-rings, gaskets etc. Working in the oilfield I make it a habit now whenever I remove anything that has a sealing surface I replace with a new gasket/o-ring...everytime. Such a cheap fix for a potentially catastrophic problem __________________ '11 335is BSM MT "BMW Performance Editon" \| '16 Porsche Macan Turbo GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 1 whyzee1252007.00 Quote

03-08-2017, 04:30 PM	#9
FCobra94 Guest 0 Rep n/a Posts Drives:
	Appreciate 1 SE7EN335381.50 Quote

03-09-2017, 03:09 AM	#11
SE7EN335 Major 382 Rep 1,066 Posts Drives: 2022 M3 XDrive, 2023 IX M60 Join Date: Aug 2015 Location: Sydney, Australia iTrader: (1)	Just been hearing a lot of horror stories with the RR600s and 700s, seeing as its common for the turbo shafts on them to crack with repeated spirited driving. That's why Ive been wanting to change them for PS2s but yeah I'm likely now to just ride it out till they fail, however that long that may be. It most possibly will last till I sell off the car.
	Appreciate 0 Quote

03-09-2017, 11:04 PM	#14
Supra2k6 Lieutenant 132 Rep 573 Posts Drives: 335i Join Date: Dec 2013 Location: The District iTrader: (1)	It wouldnt make sense, but if you do id take them off your hands just pm me
	Appreciate 0 Quote

03-09-2017, 11:08 PM	#15
mojobmw_e90 Major 382 Rep 1,497 Posts Drives: 2014 E63S Join Date: Oct 2014 Location: Chicago IL iTrader: (3)	I'm at 1.5yrs on my hexons and no issues knock on wood
	Appreciate 0 Quote