Running VRSF Inlets Reciurculating

Lewis Cosgrove · 05-04-2017, 08:56 AM

Is there anyway to attach the stock DVs to VRSF inlets?

Is is possible to remove the locking part, so your just left with the tube? Then you could use a pipe to connect from the inlet to DV tube.

Anyone running a setup like this?

mojobmw_e90 · 05-04-2017, 09:24 AM

Yes it slides off. Put a flat head and pry it off. Being plastic and being heated so many times it's probably going to break anyways

Lewis Cosgrove · 05-04-2017, 10:29 AM

I might try that then, bit stuffed if it cracks tho. Have you tired it before?

Lewis Cosgrove · 05-05-2017, 12:29 PM

For anyone wondering, this diy should work fine. All you do is remove the locking mechanism from the end of the dv pipe. Pour hot water on it then it should pull off. Then tape the end of the bung supplied with the vrsf inlets. The tape allows you to get a seal using the clamp.

05-04-2017, 08:56 AM	#1
Lewis Cosgrove New Member 5 Rep 19 Posts Drives: BMW 135i E82 2008 Join Date: Oct 2016 Location: Scotland iTrader: (0)	Running VRSF Inlets Reciurculating Is there anyway to attach the stock DVs to VRSF inlets? Is is possible to remove the locking part, so your just left with the tube? Then you could use a pipe to connect from the inlet to DV tube. Anyone running a setup like this? Attached Images Last edited by Lewis Cosgrove; 05-04-2017 at 09:05 AM..
	Appreciate 0 Tweet Quote

05-04-2017, 09:24 AM	#2
mojobmw_e90 Major 382 Rep 1,497 Posts Drives: 2014 E63S Join Date: Oct 2014 Location: Chicago IL iTrader: (3)	Yes it slides off. Put a flat head and pry it off. Being plastic and being heated so many times it's probably going to break anyways
	Appreciate 1 fordbaxter19.50 Quote

05-04-2017, 10:29 AM	#3
Lewis Cosgrove New Member 5 Rep 19 Posts Drives: BMW 135i E82 2008 Join Date: Oct 2016 Location: Scotland iTrader: (0)	I might try that then, bit stuffed if it cracks tho. Have you tired it before?
	Appreciate 0 Quote

05-05-2017, 12:29 PM	#4
Lewis Cosgrove New Member 5 Rep 19 Posts Drives: BMW 135i E82 2008 Join Date: Oct 2016 Location: Scotland iTrader: (0)	For anyone wondering, this diy should work fine. All you do is remove the locking mechanism from the end of the dv pipe. Pour hot water on it then it should pull off. Then tape the end of the bung supplied with the vrsf inlets. The tape allows you to get a seal using the clamp. Last edited by Lewis Cosgrove; 05-05-2017 at 12:55 PM..
	Appreciate 0 Quote