Stock 2007 E90 335xi Dynojet Results

808AWD325xi · 02-18-2008, 02:16 AM

I got a baseline dyno performed yesterday. The car is completely stock with ~7000 miles on odometer. If anyone has stock 335xi dyno charts to share, please post them to this thread!

This is after a 200 mile, 3 hour trip from my home to the shop. The car was warmed up...

The boost reading is interesting. The dyno operator suggested that perhaps their sensor didn't offer the greatest resolution at low boost levels.

4th Gear, 6AT. Air/Fuel was sampled at the right tailpipe.

92 Octane (10% percent Ethanol per Oregon Law)
2/16/2008 3:05:52 PM
Air Temp: 59.8F
Humidity: 39%
Altitude: 200 ft.

oilcrankinject · 02-18-2008, 05:27 AM

Hmmmm, I have been looking at a 335i and even the euro brochure I have says 300hp and 300 ft/lbs of torque. I wonder if BMW measured this at the crank and not at the wheels.

bulletproofuno · 02-18-2008, 06:48 AM

hm.... weird numbers...

Puderzo · 02-18-2008, 08:08 AM

Quote:

Originally Posted by svtfast

Hmmmm, I have been looking at a 335i and even the euro brochure I have says 300hp and 300 ft/lbs of torque. I wonder if BMW measured this at the crank and not at the wheels.

Of course they did. Marketed HP/TQ numbers are always measured at the crank. This goes for every car brochure you'll find (or at least 99,9% of them), regardless of car make and/or model.

- Pud.0

Bubbles · 02-18-2008, 08:56 AM

Great flat torque curve. No dip in sight.

808AWD325xi · 02-18-2008, 10:36 PM

I thought stock boost maxed out at 8.8 psi... I guess it can spike higher.

02-18-2008, 02:16 AM	#1
808AWD325xi Ballin' out of control. 529 Rep 1,289 Posts Drives: 2009 335i Join Date: Jul 2007 Location: Moline, IL iTrader: (0)	Stock 2007 E90 335xi Dynojet Results I got a baseline dyno performed yesterday. The car is completely stock with ~7000 miles on odometer. If anyone has stock 335xi dyno charts to share, please post them to this thread! This is after a 200 mile, 3 hour trip from my home to the shop. The car was warmed up... The boost reading is interesting. The dyno operator suggested that perhaps their sensor didn't offer the greatest resolution at low boost levels. 4th Gear, 6AT. Air/Fuel was sampled at the right tailpipe. 92 Octane (10% percent Ethanol per Oregon Law) 2/16/2008 3:05:52 PM Air Temp: 59.8F Humidity: 39% Altitude: 200 ft. __________________ Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
	Appreciate 0 Tweet Quote

02-18-2008, 05:27 AM	#2
oilcrankinject Captain 89 Rep 996 Posts Drives: nothing Join Date: Jul 2007 Location: USA iTrader: (0)	Hmmmm, I have been looking at a 335i and even the euro brochure I have says 300hp and 300 ft/lbs of torque. I wonder if BMW measured this at the crank and not at the wheels.
	Appreciate 0 Quote

02-18-2008, 06:48 AM	#3
bulletproofuno Banned 4 Rep 170 Posts Drives: blk on blk e92 335ic Join Date: Dec 2007 Location: LA iTrader: (0)	hm.... weird numbers...
	Appreciate 0 Quote

02-18-2008, 08:56 AM	#5
Bubbles Brigadier General 2831 Rep 4,445 Posts Drives: Green Bastard Join Date: Jun 2007 Location: Bishop Bend iTrader: (3)	Great flat torque curve. No dip in sight. __________________
	Appreciate 0 Quote

02-18-2008, 10:36 PM	#6
808AWD325xi Ballin' out of control. 529 Rep 1,289 Posts Drives: 2009 335i Join Date: Jul 2007 Location: Moline, IL iTrader: (0)	I thought stock boost maxed out at 8.8 psi... I guess it can spike higher. __________________ Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
	Appreciate 0 Quote