[NiNeTyOne]

Anyone have the special tool used to pull/install the bushings with while the rear subframe is still in the car.

I'm looking to swap out my rear subframe bushings with Aluminum ones to tighten up the noodling around of the rear geometry under cornering and I'd rather not go through the nightmare of redoing all the subframe alignment. I hear it can be a real bitch if you drop it.

From what I hear, the e9x require a f frame machine for this, or a custom made frame JIG to ensure sub-frame placement if you don't have the tool for pulling the bushings.

The mounts are not slotted for adjustment, but they are over bored enough to create alignment issues when everything is bolted back up. :/