|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CIC installation and coding!
|
|
06-29-2017, 10:30 AM | #1 |
New Member
3
Rep 24
Posts |
CIC installation and coding!
I'm after someone who can either convert my current CCC in my e92 to CIC with combox or at least point me in the right direction.
I have everything that's needed or as good as I just don't really know where to start with it. I'm from the north west area near skipton so ideally someone realativly local. The unit I have is currently having the firmware updated and FSC codes installed for my vin number so that I don't need an amulator. Any help would be appreciated. Thanks in advance. |
06-30-2017, 07:09 AM | #3 |
New Member
3
Rep 24
Posts |
I've messaged him but he's down in Kent which is still a 2 hour drive for me. He's said it's £250 to fit it for me as well which I thought sounded expensive just for the installation
|
Appreciate
0
|
07-03-2017, 05:16 AM | #5 |
New Member
3
Rep 24
Posts |
I thought getting the old kit out and the new one in would be easy enough. I was just unsure as to where to put the combox? Also I'm not the best with the electrical side of it. The kit I've got has the plugs for the new unit but they have just been lobbed off so need wiring in to the existing loom. That I'm not 100% on.
|
Appreciate
0
|
Bookmarks |
|
|