INPA Says my DME Version is 0.0.0. Is it tuned?

The-Traveler · 08-09-2017, 11:18 PM

I received the BimmerGeeks pro cable today and I'm trying to update certain modules on my 2006 330i. Completed the retrofitted MULF2HIGH update, it took 3+ hours.

Now I'm looking into the DME and it says 0.0.0.0. Could this indicate the the previous owner had it tuned?

WinKFP did say that there is a newer version, so perhaps not.

How does this look to you guys?

Thanks a bunch!

The-Traveler · 08-10-2017, 10:05 AM

Quote:

Originally Posted by BimmerGeeks

I wouldn't worry about it. It looks like a few of your modules show 0.0.0. Update away.

Loving your cable! The DME update took around 10 minutes.

If you could send those CIC update instructions for my M3 I would be happy to try it, if an ICOM could recover it, should it go bad.

My friend owns a shop and I can borrow his ICOM, but would rather not.

hassmaschine · 08-10-2017, 10:54 AM

the reason is those version strings don't apply to those modules - MSV70 for example will always say '0.0.0' or '255.255.255' for those strings.

08-09-2017, 11:18 PM	#1
The-Traveler Lieutenant 165 Rep 597 Posts Drives: E92 M3 & G30 530e Join Date: May 2015 Location: Toronto iTrader: (0)	INPA Says my DME Version is 0.0.0. Is it tuned? I received the BimmerGeeks pro cable today and I'm trying to update certain modules on my 2006 330i. Completed the retrofitted MULF2HIGH update, it took 3+ hours. Now I'm looking into the DME and it says 0.0.0.0. Could this indicate the the previous owner had it tuned? WinKFP did say that there is a newer version, so perhaps not. How does this look to you guys? Thanks a bunch! Attached Images
	Appreciate 0 Tweet Quote

08-10-2017, 10:54 AM	#3
hassmaschine Major General 3989 Rep 7,212 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	the reason is those version strings don't apply to those modules - MSV70 for example will always say '0.0.0' or '255.255.255' for those strings.
	Appreciate 1 BimmerGeeks1180.00 Quote