[stokieshinobi]

Hi guys

Can anyone tell me how to code my angel eyes and fog lights (as I have LEDs in them now) to be on all the time? I have a FRM3 module.

I've messed around with some of the DRL options in ncsdummy but none make any difference

Cheers guys

[stokieshinobi]

Anyone?

[lucasmiller2015]

Try setting the following values on the FRM3:

VERHALTEN_DRL_TFL_3R
drl_s

DRL_TFL_MIT_SL_1
aktiv

DRL_TFL_MIT_SML_3R
aktiv

[jame92r]

What LEDs did you pick up? Any pictures?!

[halcyon026]

I have some notes from when I did some coding on the AE's and Fogs. See if any of the below might do the trick.


AE no dimming.
http://www.e90post.com/forums/showthread.php?t=623634

PWM_RL_BL_1_FKT_SL = wert_01
That changes it to 9.7v.


Fog Lights Auto Turn on with Headlights: NRFM

NSW_FKT_PARKL = active

NSW_FKT_SL = active


DRL coding: To AE only
http://www.e90post.com/forums/showthread.php?t=931405
In NFRM:

Tagfahrlicht_ece_0
Aktiv

Verhalten_drl_tfl
drl_s

(It was drl_h)


Fog Lights to come on with the Low beams. Also in the Auto Position:
PWM_NSW_PARKL
wert_02


To have foglights on as DRL along with your AE (assuming you have AE set as drl) only, do the following in you NFRM module:

DRL_TFL_MIT_NSW
nicht_aktiv --> change to "aktiv"

PWM_NSW_TFL
wert_01--> change to "wert_02"


This way, your fogs turn on as you drl along with your other drl lights (AE). It does not show on your cluster that they are on.
When you move the switch to your lowbeams, they shut off (can be toggled one via the foglight button, like before)


High Beams and Fog lights at the same time: Change to 'nicht_aktiv' to enable (NFRM):
FL_UND_NSW_NICHT_GLEICHZ


Allows fog lights to stay on when the high beams are flashed. Change to 'nicht_aktiv' to enable: NFRM:
LH_UND_NSW_NICHT_GLEICHZ


Front fog lights on when unlocking the car: NFRM ( Values: "hart_einschalten" - instant on; "soft_einschalten" - gradual; "nicht_aktiv" - disabled)
WL_NSW

[avi312singh]

You also can change the voltage going to the angel eyes this increasing the brightness which can be done through NCS Dummy

I've changed mine to 13.7v which was actually already a preset option, but added a custom value anyway

13.7v is safe because it is the standard voltage for many modern cars and BMW for some reason have not done this. I have seen people on youtube go to 16v without any issues but 13.7v I believe gives about a 10-15% increase in brightness and really does show at night!

[PeterFaludi]

Originally Posted by avi312singh

You also can change the voltage going to the angel eyes this increasing the brightness which can be done through NCS Dummy

I've changed mine to 13.7v which was actually already a preset option, but added a custom value anyway

13.7v is safe because it is the standard voltage for many modern cars and BMW for some reason have not done this. I have seen people on youtube go to 16v without any issues but 13.7v I believe gives about a 10-15% increase in brightness and really does show at night!

Does it increase the tail light brightness also? It should be, right?
PWM_RL_BL_1_FKT_SL
PWM_RL_BL_2_FKT_SL

With these to change the value voltage to 13.7 V