[cruizinmax]

I have a strange issue I can't seem to figure out. I have an 09 e90 that I did a combox retrofit into. I'm new to BMW's and coding. I have owned the car for about a month and have never coded a BMW previously. I have been able to successfully program the cic and combox using NCSexpert. I have streaming bluetooth, coded out the SOS error, everything seems to be playing together nicely, except... I can't see or save a radio preset now and my iDrive screen is stuck in night mode. If I am in the FM radio looking through all the stations I can see stations that are saved with the disk symbol and checkmark but if I look in the presets menu there are no stations listed. If I try and save a station it pauses on a blank screen for 20 or so seconds and goes back to the list where presets would be saved. The last 7 of my vin is e190850 and here is the list of option codes that my car current has coded.

E90_#0311&LCSW%0A52*PM73$1CA$205$249$2S2$2VB$2XA$3 19$322$3AP$403$430$431$441$459$465$481$488$494$497 $4AB$4NA$520$521$522$524$534$544$563$570$5GA$609$6 14$615$620$644$645$653$655$676$697$6AA$6AB$6AL$6FL $6UH$6VC$704$760$823$840$845$850$853$876$8S4$925-B090

Here is the troubleshooting that I have done so far. Initially coding the car I changed the VO for the cas module using fa_write to the above settings. Next coded the MEDIA module using sg_codieren to that vo. That got my bluetooth streaming and idrive menus to show and work. That's when I noticed I couldn't see my radio presets. I next tried to reset the cas module and cic using sg_codieren. At this time I hadn't changed anything in the nfrm module so I thought that may be the problem. I wrote the VO using fa_write to that module, no presets still. Lastly I reset cas, nfrm, cic using sg_codieren again. Still no presets. Hopefully I am just overlooking something simple like a missing code or something but I can't seem to figure it out.