[pianoman90]

So I'm currently installing a **********s E90 M3 rep front bumper. From what I have seen, I have the stock H8 fog lights in my car. I have the new fogs from **********s, which have a 9006 bulb. They sent connectors, but it looks like it will require splicing (I'm non-Xenon btw)

1) Which connectors are available for plug-and-play? I've found male / female ends but they don't seem like they will fit.

2) If I choose to use the MB connectors, which wires should I splice together?

Here are a few pics of the MB connector:





Thanks!

[Miami]

same thing happened with my M3 Rep bumper, stock was an H11 connector but fog lamps on Rep bumper were different, bought the H11 male wiring harness and spliced those together, took 5 mins. general rule of thumb is black goes to black(ground wire), then the brown from car went with the yellow on fog (this is your positive wire)

[pianoman90]

Thanks, appreciate the info!

[langsbr]

I didn't want to hack up the wiring on my car so I bought these - cheap.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[Pixel8ed]

I used the converter as well. Plug and play. As well as instantly reversible.