[Aseneph]

https://datazap.me/u/aseneh/mhd-e30?log=0&data=4-16

Misfired in cyl 4. Replaced coil. I also have a 2E7F shadow code.

[Toome]

Originally Posted by Aseneph

https://datazap.me/u/aseneh/mhd-e30?log=0&data=4-16

Misfired in cyl 4. Replaced coil. I also have a 2E7F shadow code.

Relog and floor it from 3k to redline. You aren't flooring it until the very end, so this log isn't very useful.

[Aseneph]

Originally Posted by Toome

Relog and floor it from 3k to redline. You aren't flooring it until the very end, so this log isn't very useful.

I can't floor it without going sideways lol but I'll try again

[Toome]

Originally Posted by Aseneph

I can't floor it without going sideways lol but I'll try again

You don't have to stomp the pedal, but make sure your foot is flat before 3.5k RPM.

[Aseneph]

Originally Posted by Toome

You don't have to stomp the pedal, but make sure your foot is flat before 3.5k RPM.

Got it, will post soon

[Aseneph]

https://datazap.me/u/aseneh/mhd-e30?log=0&data=4-5-16

updated

[Aseneph]

Originally Posted by Toome

You don't have to stomp the pedal, but make sure your foot is flat before 3.5k RPM.

https://datazap.me/u/aseneh/mhd-e30?log=0&data=4-16

This one should be better

[Toome]

Originally Posted by Aseneph

https://datazap.me/u/aseneh/mhd-e30?log=0&data=4-16

This one should be better

Nothing too alarming, but I'm not an expert in reading logs.

A few timing corrections on cylinder 6 and your IAT's jump by almost 30 degrees. Do you have a stock intercooler?

I would take a few more logs just to have a larger data set.

[Aseneph]

Originally Posted by Toome

Nothing too alarming, but I'm not an expert in reading logs.

A few timing corrections on cylinder 6 and your IAT's jump by almost 30 degrees. Do you have a stock intercooler?

I would take a few more logs just to have a larger data set.

I have VRSF 5" Stepped IC. I'll be swapping the rest of my coils when they come in.

[Toome]

Originally Posted by Aseneph

I have VRSF 5" Stepped IC. I'll be swapping the rest of my coils when they come in.

Disregard my IAT comment, 100* is still very cool.

Great, I'm curious to see if that changes anything.