[Kenith]

I’ve used Carly to code out lci lights on my 09 m3. Left side works, but all three functions on the right is not working. From what I’ve gathered, it’s possibly the frm module. Could anyone add any input if that’s the most likely culprit? When swapping back to the stock pre lci tails, the right running lights work, but no blinkers or brakes. Left side works perfectly and I’ve swapped the lamps vice versa with the same effects (left on right doesn’t work, but right on left does). TIA!

Last thing- reverting back to the Carly stock backup didn’t help.

[stylez1989]

had a similar problem, was able to fix it from a blank MAN file

http://www.e90post.com/forums/showthread.php?t=1433855

[matteblue3er]

Don't use a blank manipulation file. That is the incorrect method.

Use the "expert profile" or any profile with manipulation off to default the module based off the VO/FA string. Then you can reapply custom coding