002FA3 DME: No coding

335ithrust · 04-01-2018, 07:01 AM

Hi Guys,

I was using a 7 amp charger when I used XHP to flash the transmission and failed due to to low voltage, drove the car and used the charger again and when through successfully. The car drives great with no symptoms but pulls up with 1 error, 002FA3 DME: No coding. Stock car with MHD stage 1

bradsm87 · 04-02-2018, 01:04 AM

2FA3 is a common code with no side effects whatsoever. It comes from flashing a different ZB number without coding afterwards. Do you have a BMS back end flash by any chance?

The old trick to get rid of it used to be just sending blank coding to the DME with Ediabas but I think all you need to do now is clear codes with MHD and it codes the DME too.

335ithrust · 04-02-2018, 01:54 AM

Thanks bradsm87, Rheingold detects the error but wouldn't delete it, I didn't think to use MHD to clear the code. Stock car, no back end flash.

vtl · 04-02-2018, 06:36 PM

Recode the 62BMO (the DME) module in Expertmode in NCSExpert, or can recode the DME in ISTA/Rheingold

04-01-2018, 07:01 AM	#1
335ithrust New Member 2 Rep 11 Posts Drives: E93 335i Join Date: Jun 2015 Location: Australia iTrader: (0)	002FA3 DME: No coding Hi Guys, I was using a 7 amp charger when I used XHP to flash the transmission and failed due to to low voltage, drove the car and used the charger again and when through successfully. The car drives great with no symptoms but pulls up with 1 error, 002FA3 DME: No coding. Stock car with MHD stage 1
	Appreciate 0 Tweet Quote

04-02-2018, 01:04 AM	#2
bradsm87 Lieutenant Colonel 603 Rep 1,693 Posts Drives: F25 LCI xDrive30d Join Date: Jun 2013 Location: Australia iTrader: (0)	2FA3 is a common code with no side effects whatsoever. It comes from flashing a different ZB number without coding afterwards. Do you have a BMS back end flash by any chance? The old trick to get rid of it used to be just sending blank coding to the DME with Ediabas but I think all you need to do now is clear codes with MHD and it codes the DME too.
	Appreciate 0 Quote

04-02-2018, 01:54 AM	#3
335ithrust New Member 2 Rep 11 Posts Drives: E93 335i Join Date: Jun 2015 Location: Australia iTrader: (0)	Thanks bradsm87, Rheingold detects the error but wouldn't delete it, I didn't think to use MHD to clear the code. Stock car, no back end flash.
	Appreciate 0 Quote

04-02-2018, 06:36 PM	#4
vtl Brigadier General 1508 Rep 3,148 Posts Drives: 2008 BMW 135i MT Join Date: Apr 2015 Location: Melbourne, Australia iTrader: (0)	Recode the 62BMO (the DME) module in Expertmode in NCSExpert, or can recode the DME in ISTA/Rheingold __________________ Build Thread
	Appreciate 0 Quote