Hardware included with BMW Performance Suspension

Phyrexia · 04-04-2018, 01:30 AM

Hi All, I got my Performance Suspension in the mail and it comes with a lot of nuts. I'm not sure which is which. I'm sure I can just pay attention when I pull the old parts off but I'd like to know where I'm at before I start the process.

Got it (mostly) figured out with some help. The bigass nylon locking nuts were not used. Seemed like there could have been two more of nut D included in the set.

A: No idea, was unused and nothing was like it
B: Strut Pinch Bolt (thanks BigInBoca)
C: Strut top nut - strut to strut mount "self locking nut" 31336764470
D: Lower shock nut 33506784003
E: Strut Mount to chassis nuts
F: Sway Bar Bushing Mount nuts

tlow98 · 04-04-2018, 01:35 AM

A is top of strut nut.
B looks like something that would connect to the king pin.

It will be very apparent when you replace these parts. Just match them up as you go along. Looks like you'll have plenty of hardware.

Biginboca · 04-04-2018, 04:56 AM

If memory serves what you have noted looks correct except:

A = Front Control Arm to Knuckle

B = Possibly for the Pinch Bolt on the front knuckle for the strut, or the front swaybar end link. I can’t remember this one.

F = Front Swaybar to Subframe

No need to sweat it though, when you go through it you will be able to figure it all out as mentioned above.

agustincuenca · 04-04-2018, 10:02 AM

why don't you just match them up as you take the old ones off?

Phyrexia · 04-09-2018, 12:33 PM

Actually, after installing the kit, I have no idea what nuts A are for. They are not control arm bushing nuts. I didn't see anything else like them. There were also several identical bolts to D that I feel like should have been in the hardware but were not.

Jklad · 04-09-2018, 06:34 PM

Quote:

Originally Posted by Phyrexia

Actually, after installing the kit, I have no idea what nuts A are for. They are not control arm bushing nuts. I didn't see anything else like them. There were also several identical bolts to D that I feel like should have been in the hardware but were not.

So how do you like it?

Phyrexia · 04-09-2018, 06:38 PM

Quote:

Originally Posted by Jklad

So how do you like it?

I like it! I made another thread. http://www.e90post.com/forums/showthread.php?t=1484539

04-04-2018, 01:30 AM	#1
Phyrexia Resident Pedant 506 Rep 792 Posts Drives: '15 335i 8AT Join Date: Nov 2017 Location: Limbo iTrader: (1)	Hardware included with BMW Performance Suspension Hi All, I got my Performance Suspension in the mail and it comes with a lot of nuts. I'm not sure which is which. I'm sure I can just pay attention when I pull the old parts off but I'd like to know where I'm at before I start the process. Got it (mostly) figured out with some help. The bigass nylon locking nuts were not used. Seemed like there could have been two more of nut D included in the set. A: No idea, was unused and nothing was like it B: Strut Pinch Bolt (thanks BigInBoca) C: Strut top nut - strut to strut mount "self locking nut" 31336764470 D: Lower shock nut 33506784003 E: Strut Mount to chassis nuts F: Sway Bar Bushing Mount nuts Attached Images __________________ '15 F30 335i 8AT Estoril II/Black (12.218 @ 114.94mph) MHD Stage 2+ 93 / XHP Stage 3 / M-Goodies / K&N Filter / ER CP / CSF IC / NGK 97506 / ER DP / Michelin A/S 3+ Last edited by Phyrexia; 04-09-2018 at 12:50 PM..
	Appreciate 0 Tweet Quote

04-04-2018, 01:35 AM	#2
tlow98 Major General 2299 Rep 5,214 Posts Drives: 2009 E91, 2014 F15 x35i Join Date: Aug 2011 Location: Bay Area iTrader: (2)	A is top of strut nut. B looks like something that would connect to the king pin. It will be very apparent when you replace these parts. Just match them up as you go along. Looks like you'll have plenty of hardware.
	Appreciate 1 Phyrexia506.00 Quote

04-04-2018, 04:56 AM	#3
Biginboca Colonel 3789 Rep 2,738 Posts Drives: 2009 E92 328i 6MT Join Date: Jun 2017 Location: Boynton Beach, FL... USA iTrader: (3)	If memory serves what you have noted looks correct except: A = Front Control Arm to Knuckle B = Possibly for the Pinch Bolt on the front knuckle for the strut, or the front swaybar end link. I can’t remember this one. F = Front Swaybar to Subframe No need to sweat it though, when you go through it you will be able to figure it all out as mentioned above. Last edited by Biginboca; 04-04-2018 at 05:04 AM..
	Appreciate 1 Phyrexia506.00 Quote

04-04-2018, 10:02 AM	#4
agustincuenca First Lieutenant 154 Rep 343 Posts Drives: 2008 E90 335i; 2016 F80 M3 Join Date: Sep 2014 Location: S Louis iTrader: (0) Garage List 2016 BMW M3 [0.00] 2008 BMW 335i [0.00]	why don't you just match them up as you take the old ones off?
	Appreciate 0 Quote

04-09-2018, 12:33 PM	#5
Phyrexia Resident Pedant 506 Rep 792 Posts Drives: '15 335i 8AT Join Date: Nov 2017 Location: Limbo iTrader: (1)	Actually, after installing the kit, I have no idea what nuts A are for. They are not control arm bushing nuts. I didn't see anything else like them. There were also several identical bolts to D that I feel like should have been in the hardware but were not. __________________ '15 F30 335i 8AT Estoril II/Black (12.218 @ 114.94mph) MHD Stage 2+ 93 / XHP Stage 3 / M-Goodies / K&N Filter / ER CP / CSF IC / NGK 97506 / ER DP / Michelin A/S 3+
	Appreciate 0 Quote