|
|
|
|
 |
 |
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
DEACTIVATE AWD to dyno
|
 |
| 04-15-2018, 10:44 PM | #1 |
|
Major
 
416
Rep 1,425
Posts |
DEACTIVATE AWD to dyno
Where I live don't have AWD dyno, I need to drive about 6 hours to get an AWD dyno. As I will be doing an intake manifold upgrade and tune, I would like to know before and after gain. When the transfer case connector is disconnected, the front wheels will be deactivated. Will I get an accurate WHP?
Last edited by Blueeyesredpanda; 04-21-2018 at 11:14 PM.. |
| 04-23-2018, 04:47 PM | #3 |
|
Enlisted Member
 23
Rep 31
Posts |
I mean...I would assume with the actuator disconnected, power will only run to the rear wheels so I would THINK you would get an accurate number. Just remember that rear diff is totally open, not sure if that is going to have an effect at all. Either way, you should see a differential from before and after the mods are installed, just don't know how "spot-on" that is going to be.
Last edited by eetadik; 04-23-2018 at 04:48 PM.. Reason: Grammar |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
