E90Post
 


 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > General E90 Sedan / E91 Wagon / E92 Coupe / E93 Cabrio > 2006 BMW E90 cranks but no start issue



Reply
 
Thread Tools Search this Thread
      04-23-2018, 08:40 AM   #1
Joel00667
Registered
0
Rep
3
Posts

Drives: 2006 BMW 330i
Join Date: Apr 2018
Location: Georgea

iTrader: (0)

2006 BMW E90 cranks but no start issue

hello everyone I am Alex new to the forum world.My E90 will not start at all.
you can sit there all day and crank away and will not start.
Facts: the tachometer moves from 0 when cranking, when i crank the car it smells like fuel i can hear the fuel pump start inside the car. brand new mass air flow sensor, new spark plugs.
before this issues i had replace the valve cover gasket seal and on the same day took out the intake manifold out to replace the hole ccv system. I also replace the fuse box on the glove compartment. I went over it several times and made sure all is back connected the way it was.

Please can some one help me, I dont know what ease to do.
Im in FT Stewart, GA in case anyone is close by.

thank you
Appreciate 0
      04-23-2018, 12:16 PM   #2
GoRomeo
Brigadier General
GoRomeo's Avatar
United_States
1286
Rep
4,192
Posts

Drives: 330i, 135i
Join Date: Feb 2006
Location: San Diego CA

iTrader: (0)

Garage List
2008 BMW 135i  [9.50]
2006 330i  [6.75]
Quote:
Originally Posted by Joel00667 View Post
hello everyone I am Alex new to the forum world.My E90 will not start at all.
you can sit there all day and crank away and will not start.
Facts: the tachometer moves from 0 when cranking, when i crank the car it smells like fuel i can hear the fuel pump start inside the car. brand new mass air flow sensor, new spark plugs.
before this issues i had replace the valve cover gasket seal and on the same day took out the intake manifold out to replace the hole ccv system. I also replace the fuse box on the glove compartment. I went over it several times and made sure all is back connected the way it was.

Please can some one help me, I dont know what ease to do.
Im in FT Stewart, GA in case anyone is close by.

thank you
CEL warning light ON? Read for codes if you can...
Appreciate 0
      04-23-2018, 11:06 PM   #3
Joel00667
Registered
0
Rep
3
Posts

Drives: 2006 BMW 330i
Join Date: Apr 2018
Location: Georgea

iTrader: (0)

The codes that I am getting are:
P 1727

P 1056

P 1030

P 1335

P 1449

I just replaced the CPS today and still same problem, i dont want to take it to a shop any Help please.
Appreciate 0
      04-24-2018, 01:10 AM   #4
ctuna
Lieutenant General
2064
Rep
13,401
Posts

Drives: 325xi 06 wagon MT
Join Date: Jan 2010
Location: Santa Cruz, Ca

iTrader: (0)

Do you have a BMW compatible scanner.
Because most generic scanners won't tell you the
whole story on a BMW.

Did you allow the valvetronic motor to reset before trying
to start.

suggest getting the bimmergeeks.com cable and
Inpa suite and Ista D/P free downloads with the cable.

Last edited by ctuna; 04-24-2018 at 01:16 AM..
Appreciate 0
Reply

Bookmarks

Tags
e90, wont start


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:24 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST