NCS Expert - need to edit profile?

Aus335iguy · 05-05-2017, 07:51 PM

Hi mate
On my version of 4.0.1 it asks for password and I just hit ok. There must be something different about your install. Have a read through the readme file that you got with your software pack. There's likely a clue in there. Otherwise I can send you a link to the pack that I used.

Showoff · 05-06-2017, 10:37 AM

Quote:

Originally Posted by Aus335iguy

Hi mate
On my version of 4.0.1 it asks for password and I just hit ok. There must be something different about your install. Have a read through the readme file that you got with your software pack. There's likely a clue in there. Otherwise I can send you a link to the pack that I used.

I don't think the install of NCS Expert 4.0.1 is the problem, it's the profile. Mine is 2.0 and I need 3.0 or 4.0.

I don't get to the stage of entering the password when editing Expertmode as I get some other error when I try that?

Do you know where I can get a 3.0 profile from?

Thanks

Aus335iguy · 05-06-2017, 05:07 PM

Quote:

Originally Posted by Showoff

Quote:

Originally Posted by Aus335iguy

Hi mate
On my version of 4.0.1 it asks for password and I just hit ok. There must be something different about your install. Have a read through the readme file that you got with your software pack. There's likely a clue in there. Otherwise I can send you a link to the pack that I used.

I don't think the install of NCS Expert 4.0.1 is the problem, it's the profile. Mine is 2.0 and I need 3.0 or 4.0.

I don't get to the stage of entering the password when editing Expertmode as I get some other error when I try that?

Do you know where I can get a 3.0 profile from?

Thanks

No I don't sorry . My software pack must've come with it.

Showoff · 05-07-2017, 10:11 AM

The error I get when I follow the instructions to creating a new profile is: IND-ERR-003

This is after clicking File, Edit profile where it says "No Password needed: Press OK"

After clicking OK..

Click on Car-,Keymemory.
Tick the boxes Car-Keymemory active and Trace individualzable FSW-/PSW.
Kernel functions was already ticked.

It then says Error: IND-ERR-003.

Is anyone able to send me a 3.0 profile?

Thanks

Showoff · 05-09-2017, 11:17 AM

Think I've sorted this now myself...
Found a download ages ago, that didn't work on the old laptop I'm using for coding, probably due to Internet Explorer and using XP.
Tried the link on another laptop and volla, 3.0 profile downloaded and working.

New problem is VIN faulty error, but hopefully updating the Daten files will solve that?

oli3 · 05-09-2017, 11:39 AM

Quote:

Originally Posted by Showoff

New problem is VIN faulty error, but hopefully updating the Daten files will solve that?

• A quick search on here reveals that maybe you can't run INPA and NCS both at the same time. (I don't recall having this issue, but I do close INPA regularly during coding sessions).
Try closing eveything, disconnect cable, plug it back in and start NCSEXPERT.
http://www.e90post.com/forums/showthread.php?t=1016784

• If that doesn't work you may have to disable JB4 if you have that according to another thread on here http://www.e90post.com/forums/showthread.php?t=973071

Showoff · 05-09-2017, 05:01 PM

Quote:

Originally Posted by oli3

• A quick search on here reveals that maybe you can't run INPA and NCS both at the same time. (I don't recall having this issue, but I do close INPA regularly during coding sessions).
Try closing eveything, disconnect cable, plug it back in and start NCSEXPERT.
http://www.e90post.com/forums/showthread.php?t=1016784

• If that doesn't work you may have to disable JB4 if you have that according to another thread on here http://www.e90post.com/forums/showthread.php?t=973071

Thanks!

I'm in the process of updating the Daten files and will also try not running INPA at the same time, so thanks for the tip.

I also read about disabling JB4, not that I know what it means or how to do it yet, but if I still have issues I'll look into that. I did read that it relates to the 335 (which I actually do have) but my coding issue I'm after help with here is actually for the wife's E70 X5.

Thanks again.

Aus335iguy · 05-09-2017, 06:01 PM

Quote:

Originally Posted by Showoff

Quote:

Originally Posted by oli3

&#8226; A quick search on here reveals that maybe you can't run INPA and NCS both at the same time. (I don't recall having this issue, but I do close INPA regularly during coding sessions).
Try closing eveything, disconnect cable, plug it back in and start NCSEXPERT.
http://www.e90post.com/forums/showthread.php?t=1016784

&#8226; If that doesn't work you may have to disable JB4 if you have that according to another thread on here http://www.e90post.com/forums/showthread.php?t=973071

Thanks!

I'm in the process of updating the Daten files and will also try not running INPA at the same time, so thanks for the tip.

I also read about disabling JB4, not that I know what it means or how to do it yet, but if I still have issues I'll look into that. I did read that it relates to the 335 (which I actually do have) but my coding issue I'm after help with here is actually for the wife's E70 X5.

Thanks again.

Do you have the coding tool? It makes updating daten easier ?

Showoff · 05-10-2017, 09:14 AM

Quote:

Originally Posted by Aus335iguy

Do you have the coding tool? It makes updating daten easier ?

Yep got that.

Thanks

opjose · 05-10-2017, 10:28 AM

Quote:

Originally Posted by Showoff

Quote:

Originally Posted by oli3

&#8226; A quick search on here reveals that maybe you can't run INPA and NCS both at the same time. (I don't recall having this issue, but I do close INPA regularly during coding sessions).
Try closing eveything, disconnect cable, plug it back in and start NCSEXPERT.
http://www.e90post.com/forums/showthread.php?t=1016784

&#8226; If that doesn't work you may have to disable JB4 if you have that according to another thread on here http://www.e90post.com/forums/showthread.php?t=973071

Thanks!

I'm in the process of updating the Daten files and will also try not running INPA at the same time, so thanks for the tip.

I also read about disabling JB4, not that I know what it means or how to do it yet, but if I still have issues I'll look into that. I did read that it relates to the 335 (which I actually do have) but my coding issue I'm after help with here is actually for the wife's E70 X5.

Thanks again.

Yes you must disable the JB4 before attempting to code or program the car.

To do so, just set the JB4 to map zero.

Mpower04 · 07-09-2017, 06:29 PM

Can someone please send me profiles as well. All I have is "default profile" and "ncs dummy profile"

mpetro · 10-23-2017, 04:31 PM

Quote:

Originally Posted by Warpig12354

Can someone please send me profiles as well. All I have is "default profile" and "ncs dummy profile"

I have the same "default profile" and "ncs dummy profile" - how can I create what I need or can someone send me profile - v4.0.1

ScarboroughBMW · 11-04-2017, 10:40 AM

Not sure if this helps, but there are links in this thread for NCS Expert profiles, v4.0.1.

http://www.e90post.com/forums/showpo...postcount=4476

RottMax · 11-29-2017, 07:04 AM

Hi!

i'm new here....
can someone send me profil or profiles for my E90 320d 2011?
I would like to have automatic folding mirrors when lock or unlock and for rear view camera..
thank you in advance

Joe@TopGearSolutions · 11-29-2017, 09:57 AM

Quote:

Originally Posted by RottMax

Hi!

i'm new here....
can someone send me profil or profiles for my E90 320d 2011?
I would like to have automatic folding mirrors when lock or unlock and for rear view camera..
thank you in advance

This has all the info you need: http://www.e90post.com/forums/showthread.php?t=1204192

RottMax · 11-30-2017, 06:54 AM

Thank you very much!

neers13 · 06-02-2018, 10:07 PM

Quote:

Originally Posted by ******84

It is too old. I will PM you with new software.

Hi, I am new to coding too. My INPA version is 6.4.3.
In profiles there are only 2, Expertmode and Code Control Unit Allow ZCS Reading.
I haven't done coding yet, I intend to change FM frequency on a Japanese imported BMW year 2006. Please advise, will coding work? Which profiles do I need? WHere to download, how to add profiles? Please help

05-05-2017, 07:51 PM	#67
Aus335iguy Colonel 660 Rep 2,140 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Hi mate On my version of 4.0.1 it asks for password and I just hit ok. There must be something different about your install. Have a read through the readme file that you got with your software pack. There's likely a clue in there. Otherwise I can send you a link to the pack that I used. __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

05-07-2017, 10:11 AM	#70
Showoff New Member 0 Rep 11 Posts Drives: BMW 335d M-Sport Coupe Join Date: Jul 2012 Location: Hampshire iTrader: (0)	The error I get when I follow the instructions to creating a new profile is: IND-ERR-003 This is after clicking File, Edit profile where it says "No Password needed: Press OK" After clicking OK.. Click on Car-,Keymemory. Tick the boxes Car-Keymemory active and Trace individualzable FSW-/PSW. Kernel functions was already ticked. It then says Error: IND-ERR-003. Is anyone able to send me a 3.0 profile? Thanks
	Appreciate 0 Quote

05-09-2017, 11:17 AM	#71
Showoff New Member 0 Rep 11 Posts Drives: BMW 335d M-Sport Coupe Join Date: Jul 2012 Location: Hampshire iTrader: (0)	Think I've sorted this now myself... Found a download ages ago, that didn't work on the old laptop I'm using for coding, probably due to Internet Explorer and using XP. Tried the link on another laptop and volla, 3.0 profile downloaded and working. New problem is VIN faulty error, but hopefully updating the Daten files will solve that?
	Appreciate 0 Quote

07-09-2017, 06:29 PM	#77
Mpower04 Private First Class 150 Rep 178 Posts Drives: E92 M3 Join Date: Dec 2011 Location: Austin iTrader: (4)	Can someone please send me profiles as well. All I have is "default profile" and "ncs dummy profile"
	Appreciate 0 Quote

11-04-2017, 10:40 AM	#79
ScarboroughBMW New Member 2 Rep 7 Posts Drives: 2008 E92 335xi Join Date: Nov 2017 Location: Toronto Ontario, Canada iTrader: (0)	Not sure if this helps, but there are links in this thread for NCS Expert profiles, v4.0.1. http://www.e90post.com/forums/showpo...postcount=4476
	Appreciate 0 Quote

11-29-2017, 07:04 AM	#80
RottMax Registered 0 Rep 2 Posts Drives: 320d E90 Lci Join Date: Nov 2017 Location: KRapina, Croatia iTrader: (0)	Hi! i'm new here.... can someone send me profil or profiles for my E90 320d 2011? I would like to have automatic folding mirrors when lock or unlock and for rear view camera.. thank you in advance
	Appreciate 0 Quote

11-30-2017, 06:54 AM	#82
RottMax Registered 0 Rep 2 Posts Drives: 320d E90 Lci Join Date: Nov 2017 Location: KRapina, Croatia iTrader: (0)	Thank you very much!
	Appreciate 0 Quote