How to Code out rear PDC

trickcruiser · 05-12-2018, 05:28 PM

Updated with instructions:

Greetings,
I have a friends car that we are just completing a full M3 body upgrade (minus the quarters). The rear bumper was not setup for PDC and we chose to just delete them.

To remove all errors you must remove $507 from the VO as well as physically unplug the module.

First, remove the VO code for just rear PDC $507 from the CAS and NFRM (verifty that it is gone in both.

Next, remove the interior panel of the rear right quarter (battery area). Behind the sound reading material you will find a small white plastic box that contains the TPMS and PDC modules. Unplug the 2 PDC plugs (we removed the module) and you are good to go!

View post on imgur.com

Hope this helps!

6ixSpd · 05-13-2018, 10:59 PM

After doing the FA_Write to CAS, do a "Process Car" job with a blank .MAN file. This should code every other module with the new VO and remove all traces of rear PDC in anything else. Seems like there are other modules in the car that also need coding, and without knowing exactly which ones, Process Car is your best bet. It'll also undo any other custom coding you've done, however.

trickcruiser · 05-14-2018, 07:07 AM

Quote:

Originally Posted by 6ixSpd

After doing the FA_Write to CAS, do a "Process Car" job with a blank .MAN file. This should code every other module with the new VO and remove all traces of rear PDC in anything else. Seems like there are other modules in the car that also need coding, and without knowing exactly which ones, Process Car is your best bet. It'll also undo any other custom coding you've done, however.

I will try that today and update.
Thank you

Evil Drew M · 06-07-2018, 10:54 AM

How did this work out for you? I am in a similar situation. I bought my car after a rear end hit repair. It had PDC originally but the replacement bumper isn't a PDC part. I have no desire to spend the money to put the PDC back on so coding it out is my best option. I am ok with coding basic stuff but haven't messed with a VO yet.

Is there a way I can back up my current coding so that after a full write I can re-apply it or will that undo the removal of the PDC from the modules I re-code? Will I need to just re-create that stuff from scratch?

trickcruiser · 06-07-2018, 10:59 AM

I am always hesitant when it comes to a full process car.

So I just unplugged the 2 plugs from the PDC unit (located on the inside of the right quarter). That with the coding I mentioned before, there are no warnings. The car has not yet hit the road but I am pretty confident that it is complete now.

Evil Drew M · 06-07-2018, 01:23 PM

Ok thanks. I'm pretty comfortable with doing what you did. I will give it a shot.

trickcruiser · 06-12-2018, 12:46 PM

Once you code out the PDC, remove the 2 plugs from the PDC module (located on the inside of the right rear quarter panel).

View post on imgur.com

Modifying first post to help anyone looking to perform this mod.

6ixSpd · 06-13-2018, 09:24 AM

Quote:

Originally Posted by trickcruiser

Once you code out the PDC, remove the 2 plugs from the PDC module (located on the inside of the right rear quarter panel).

View post on imgur.com

Modifying first post to help anyone looking to perform this mod.

This.

For anyone getting a post-accident non PDC bumper, any competent bodyshop can drill the holes with an 18mm step drill. I recently had that done for my M Sport bumper conversion and used a non-PDC bumper and it had the markings for the holes anyways.

05-12-2018, 05:28 PM	#1
trickcruiser Lieutenant 100 Rep 509 Posts Drives: F80 Join Date: Jun 2010 Location: Cincinnati, OH iTrader: (1)	How to Code out rear PDC Updated with instructions: Greetings, I have a friends car that we are just completing a full M3 body upgrade (minus the quarters). The rear bumper was not setup for PDC and we chose to just delete them. To remove all errors you must remove $507 from the VO as well as physically unplug the module. First, remove the VO code for just rear PDC $507 from the CAS and NFRM (verifty that it is gone in both. Next, remove the interior panel of the rear right quarter (battery area). Behind the sound reading material you will find a small white plastic box that contains the TPMS and PDC modules. Unplug the 2 PDC plugs (we removed the module) and you are good to go! View post on imgur.com View post on imgur.com Hope this helps! __________________ Last edited by trickcruiser; 06-12-2018 at 12:54 PM.. Reason: Update
	Appreciate 0 Tweet Quote

05-13-2018, 10:59 PM	#2
6ixSpd Save the manuals! 6069 Rep 6,765 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	After doing the FA_Write to CAS, do a "Process Car" job with a blank .MAN file. This should code every other module with the new VO and remove all traces of rear PDC in anything else. Seems like there are other modules in the car that also need coding, and without knowing exactly which ones, Process Car is your best bet. It'll also undo any other custom coding you've done, however. __________________ '16 M3 \| '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc
	Appreciate 0 Quote

06-07-2018, 10:54 AM	#4
Evil Drew M Teen Idol 0 Rep 6 Posts Drives: 2008 335xi Join Date: Feb 2013 Location: NRV iTrader: (1)	How did this work out for you? I am in a similar situation. I bought my car after a rear end hit repair. It had PDC originally but the replacement bumper isn't a PDC part. I have no desire to spend the money to put the PDC back on so coding it out is my best option. I am ok with coding basic stuff but haven't messed with a VO yet. Is there a way I can back up my current coding so that after a full write I can re-apply it or will that undo the removal of the PDC from the modules I re-code? Will I need to just re-create that stuff from scratch?
	Appreciate 0 Quote

06-07-2018, 10:59 AM	#5
trickcruiser Lieutenant 100 Rep 509 Posts Drives: F80 Join Date: Jun 2010 Location: Cincinnati, OH iTrader: (1)	I am always hesitant when it comes to a full process car. So I just unplugged the 2 plugs from the PDC unit (located on the inside of the right quarter). That with the coding I mentioned before, there are no warnings. The car has not yet hit the road but I am pretty confident that it is complete now. Last edited by trickcruiser; 06-12-2018 at 12:57 PM..
	Appreciate 0 Quote

06-07-2018, 01:23 PM	#6
Evil Drew M Teen Idol 0 Rep 6 Posts Drives: 2008 335xi Join Date: Feb 2013 Location: NRV iTrader: (1)	Ok thanks. I'm pretty comfortable with doing what you did. I will give it a shot.
	Appreciate 0 Quote

06-12-2018, 12:46 PM	#7
trickcruiser Lieutenant 100 Rep 509 Posts Drives: F80 Join Date: Jun 2010 Location: Cincinnati, OH iTrader: (1)	Once you code out the PDC, remove the 2 plugs from the PDC module (located on the inside of the right rear quarter panel). View post on imgur.com View post on imgur.com Modifying first post to help anyone looking to perform this mod.
	Appreciate 0 Quote