[Acornell77]

Hello All.

First I would like to point out, I wrote apps for iPhone for years and know my way around a computer pretty well hence the only reason I am attempting to teach myself the use of these programs. My 06 330xi reverse lights no longer work and trying to reset the module so I can get the vehicle inspected.

I first purchased

https://www.bimmergeeks.net/product-...eeks-pro-cable

then downloaded and installed
https://mega.nz/#F!zw5V0IrD!08GgdgH0AtxZcWh62_76xA

(which was a process and was not straight forward as I expected)

plugged in my cable opened Inpa and great I have the car connected on first try.

opened ncs expert and tried loading a profile but only had some things I was not seeing on any YouTube tutorials so I updated my profiles.

was able to walk through this tutorial here

everything works as should until the very end and I get a pop up error *shown in pic

I've researched this error code and simply can not find anything. I get "coding is faulty" in text. I'm able to pull vin and load modules ect.

I think its possible I need to update the daten files but theres sp many on the internet I hate to corrupt my files and have to reinstall everything.

would these be the right daten files
https://mega.nz/#F!D9RSzQDQ!kfkRj1wG6VHRtemuG7Lv0g


Any input of this would be greatly appreciated and I would be ecstatic to get this fixed.

[RocketSurgeon]

Check your cable settings to ensure that you have the latency set correctly (1ms) and have the correct cable drivers installed.

[Acornell77]

Originally Posted by RocketSurgeon

Check your cable settings to ensure that you have the latency set correctly (1ms) and have the correct cable drivers installed.

I have double checked everything was still getting errors sp I did a complete reinstall. I still get the same error. Only for this module though. If I try other modules the process works fine. I can even hear the computer in the car working.

The module is brand new so I'm trying to work with WinKFP to program the vin to it but that's the only program out of the 5 installed that doesn't work at all.

I'm using this post to try and help but it seems I'm just going in circles.

http://forum.e46fanatics.com/showthread.php?t=1029053

have done everything in this tutorial with NO luck at all.

My reverse lights do not work either so I fixed wiring and cleared codes through inpa and fixed the count error through ncs expert but still no lights. KFP

any further help would be greatly appreciated, attached is the error codes I'm receiving in Win

[bluewater328]

Again check your settings for the rate and COM port. That said, I had some issues with that install as well...maybe just user error, but the Bimmergeeks install files (on their site) with the latest Daten was what finally worked for me. I think probably the install files are more simplified.