[Occ224]

I replaced my fuel injector and now the last step is to code it with inpa. Just my luck the software is not wanting to cooperate. I'm trying to use the mikes easy bmw tool or whatever its called i cant remember off the top of my head. I push shift f2 to open e90 click on engine then click on n54. Then I push f9 and it goes to something similar to what its suposed to be but it dosnt have the injector dialog i can choose nor can I go into any other dialog from that screen. I'll push all the fkeys and nothing will work. I'll be able to provide pictures of what the last screen i get to is when i get home but hopefully me explaining it was good enough maybe someone had a similar problem. Thank you for any info

[LMB335IS]

In E90/Engine/N54/System function, you should have something like EOL injector rate comparison, shift +F4 in my case. If you're missing this you may want to delete Mike's Easy Tools. Sounds like you have a old version and its crap. Bimmergeeks.net has a really good version in their download section.

[Occ224]

Originally Posted by LMB335IS

In E90/Engine/N54/System function, you should have something like EOL injector rate comparison, shift +F4 in my case. If you're missing this you may want to delete Mike's Easy Tools. Sounds like you have a old version and its crap. Bimmergeeks.net has a really good version in their download section.

Bro thank you so much! Its back up and running.