CCC to CIC retrofit coding issue

FEDE/E92 · 11-21-2018, 11:10 AM

Recently decided to do this retrofit since it seemed straightforward. Everything connected easily as the write ups say but the coding part having issues. Im able to FA write the CAS and NFRM w/ #0910 $609 $6VA. But when I go to add SG_Corden to CIC I get an error won't let me do it
Any ideas where maybe I went wrong or maybe is a NCSexpert/Edibas setup issue. Any help would be appreciated.

Joe@TopGearSolutions · 11-21-2018, 11:15 AM

Quote:

Originally Posted by FEDE/E92

Recently decided to do this retrofit since it seemed straightforward. Everything connected easily as the write ups say but the coding part having issues. Im able to FA write the CAS and NFRM w/ #0910 $609 $6VA. But when I go to add SG_Corden to CIC I get an error won't let me do it
Any ideas where maybe I went wrong or maybe is a NCSexpert/Edibas setup issue. Any help would be appreciated.

Does the CIC power on? Can you read the module using NCS prior to trying to code it (i.e., does the NETTODAT file pop up)?

FEDE/E92 · 11-21-2018, 11:23 AM

Quote:

Originally Posted by Joe@TopGearSolutions

Does the CIC power on? Can you read the module using NCS prior to trying to code it (i.e., does the NETTODAT file pop up)?

Thank you so much for the quick reply. The CIC seems to power on but no screen. I didn't see a popup with NETTODAT when i was connected.

Joe@TopGearSolutions · 11-21-2018, 11:30 AM

Quote:

Originally Posted by FEDE/E92

Thank you so much for the quick reply. The CIC seems to power on but no screen. I didn't see a popup with NETTODAT when i was connected.

When in NCS, see if it will let you "read" the CIC, then the NETTODAT should pop up. If it errors there as well, then you have hardware install issues.

FEDE/E92 · 11-21-2018, 11:40 AM

Quote:

Originally Posted by Joe@TopGearSolutions

When in NCS, see if it will let you "read" the CIC, then the NETTODAT should pop up. If it errors there as well, then you have hardware install issues.

Same error as before popped up. Not sure what to do, i had somebody remote install this a year ago.

FEDE/E92 · 11-21-2018, 11:50 AM

Quote:

Originally Posted by Joe@TopGearSolutions

When in NCS, see if it will let you "read" the CIC, then the NETTODAT should pop up. If it errors there as well, then you have hardware install issues.

Posted error on top

FEDE/E92 · 11-21-2018, 07:18 PM

anybody can help remotely?

Nickco43 · 11-21-2018, 08:17 PM

Quote:

Originally Posted by FEDE/E92

anybody can help remotely?

PM me the team viewer login details.

FEDE/E92 · 11-21-2018, 08:24 PM

Quote:

Originally Posted by Nickco43

PM me the team viewer login details.

PM u right now

11-21-2018, 11:10 AM	#1
FEDE/E92 Lieutenant 105 Rep 544 Posts Drives: 2007 BMW 335i Join Date: Jun 2012 Location: Vacaville, CA iTrader: (3)	CCC to CIC retrofit coding issue Recently decided to do this retrofit since it seemed straightforward. Everything connected easily as the write ups say but the coding part having issues. Im able to FA write the CAS and NFRM w/ #0910 $609 $6VA. But when I go to add SG_Corden to CIC I get an error won't let me do it Any ideas where maybe I went wrong or maybe is a NCSexpert/Edibas setup issue. Any help would be appreciated. Attached Images Last edited by FEDE/E92; 11-21-2018 at 11:49 AM..
	Appreciate 0 Tweet Quote

11-21-2018, 07:18 PM	#7
FEDE/E92 Lieutenant 105 Rep 544 Posts Drives: 2007 BMW 335i Join Date: Jun 2012 Location: Vacaville, CA iTrader: (3)	anybody can help remotely?
	Appreciate 0 Quote