|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
18" AC Schnitzer Type III
|
|
10-14-2018, 11:50 PM | #1 |
New Member
2
Rep 21
Posts |
18" AC Schnitzer Type III
Hey guys Kinda strange each generation has their own FS section, in any case reposting here: I thought these would fit my m235i without spacers, unfortunately they don't clear the M brakes. The rears would work with 5mm spacers (almost cleared them), fronts i did not even try (if someone really wants to find out, i can pop them on really quick). I'm gonna go a different route. That said here are the details: 18" AC Schnitzer Type III 5x120 +43 all around. Really nice shape with no pitting or curb rash, just some really superficial scratches here and there. One wheel has a little nick on the outer lip (see 4th pic of individual wheel). Two of the center caps have some bubbling. I would rate the wheels at 9/10. Tires have maybe 500 miles on them, but are no good due to age. Bridgestone Potenza S-03 Pole Position 235/40/18 upfront, 255/35/18 in the rear. I can leave them on at no additional cost, or can take them off to save on shipping, your choice. Here are some pics: I see a beat up set of these on ebay with pitting all around for 1600, so I think my asking price is more than fair at 2k. Local pick up in northern Westchester county 10598 or i can ship if you pay for it. Thanks! |
10-29-2018, 10:06 PM | #3 |
New Member
2
Rep 21
Posts |
another bump, had some time over the weekend so test fitted the front... I can confirm they will clear the brakes with 7mm spacer upfront and back, could possibly go as low as 5mm, but would be cutting it really close... Excuse the photochop, was too lazy to bring out more than 1 wheel
|
Appreciate
0
|
Bookmarks |
|
|