[E92_335]

can you say orange peel? haha

jp man you did some very nice work

[oneshare325]

I don't want to post for you...but I bet his foam lance attachment looks like this one...

http://www.pressureparts.com/Pressure-Part-344032.aspx

(I think you were looking for a link..)

[ADHD]

Originally Posted by E92_335

can you say orange peel? haha

jk man you did some very nice work

Yes u can!! Ive been very tempted to try and wetsand it panel by panel but considering what we use the truck for I cant justify the time/effort knowing its going right back out in the dirt!! I cant even justify polishing it more than a one step!!

Originally Posted by oneshare325

I don't want to post for you...but I bet his foam lance attachment looks like this one...
http://www.pressureparts.com/Pressure-Part-344032.aspx
(I think you were looking for a link..)

Ya I started looking earlier and got busy and realized I rember reading that Cam spray is no longer making there Foam cannon anymore!
The one in the link is very similiar but Not the one i use!

If you look at the 4th picture on my shelf at the left youll see it sitting there half full!!

[L~R~G nor cal]

Originally Posted by ADHD

If you look at the 4th picture on my shelf at the left youll see it sitting there half full!!

I know, for I was sooo lucky. I ordered it and a week later they took it off the site. I just wish the bottle was larger.

[ADHD]

Originally Posted by L~R~G nor cal

I know, for I was sooo lucky. I ordered it and a week later they took it off the site. I just wish the bottle was larger.

You know I read lots of threads about that but dont have that problem!! I mean look theres still half left in that bottle and that truck is far from small I dunno maybe its just the way i make my mixtures I dunno but i couldve done that truck and my bmw with a full bottle!!
I keep the red adjuster about 1/4 open nowhere near wide open and adjust the shooter pretty narrow and it seems to do fine by me!!
I fill the bottle with like 1/4 to almost half of car wash and the rest warm water and the mixture is pretty thick so maybe thats whats making it last longer..
Either way my down fall is screwing it on/off I need to get it on some quick disconnects to make my life alot easier!!

[L~R~G nor cal]

Originally Posted by ADHD

You know I read lots of threads about that but dont have that problem!! I mean look theres still half left in that bottle and that truck is far from small I dunno maybe its just the way i make my mixtures I dunno but i couldve done that truck and my bmw with a full bottle!!
I keep the red adjuster about 1/4 open nowhere near wide open and adjust the shooter pretty narrow and it seems to do fine by me!!
I fill the bottle with like 1/4 to almost half of car wash and the rest warm water and the mixture is pretty thick so maybe thats whats making it last longer..
Either way my down fall is screwing it on/off I need to get it on some quick disconnects to make my life alot easier!!

Ya, my bottle is about half your size. I just pre-mix everything now, therefore when I need to fill it up it only takes a couple of seconds.

[FMINUS]

Great job, Megs makes a lot of great stuff that is under minded by a lot of people. I personally admire their Mirror Glaze and Detailers lines.

Remember its NOT the products, but the DETAILER!

Thats why Im sure ADHD can get the same results using TURTLE WAX

btw, Megs M105 is their best product to date!

[328i]

Nice work on the truck, how much hyperwash do you use in your foam cannon?

Meg's detailer line is great for the price, although autogeek seems to be even more expensive than my local supplier.

[ADHD]

Originally Posted by FMINUS

Great job, Megs makes a lot of great stuff that is under minded by a lot of people. I personally admire their Mirror Glaze and Detailers lines.

Remember its NOT the products, but the DETAILER!

Thats why Im sure ADHD can get the same results using TURTLE WAX

btw, Megs M105 is their best product to date!

THanks man I appreciate the compliments!!

I really like the ease of use with there detailer line products for the really work for me and I can get them all from ADS for great prices!! I still stick to mezerna for polishing though!!

I live in the desert where alot of people just prefer wash/waxes and they really have no clue or care what kind of wax I use.. So its kind of usueless to even try and upsell them to a 1step they just go Oh no i dont need that even when there is noticable spider webs over the whole hood!