[Twisted Tuning]

The time has come to start removing all the slop from the XI drive-train and start reducing the catastrophic failures when making big power!!!

Our X-Drive Mount insert were designed to combat a specific issue with the BMW X-drive drive-train and that's reduce transfer case and transmission movement at the center of the car. On the XI the actual mount is super soft. And offset to the passenger side of the drive-train. So under torque the trans and t-case twist. This will reduce the twisting that happens in turn keeping the front driveshaft/t-case output from being at weird angles under torque.

People with a XI can probably attest to drive-train clunking when quickly letting of the throttle in full or part throttle situations where the movement hasn't settled yet with the weight/torque transfer.

What comes in the Kit??

- One set of Mount inserts made from Aluminum 6061-T6

- Installation Hardware

Vehicle Fitment:

3' E46   (09/1999 — 05/2005)
3' E90   (02/2004 — 08/2008)
3' E90 LCI   (07/2007 — 12/2011)
3' E91   (03/2004 — 08/2008)
3' E91 LCI   (07/2007 — 05/2012)
3' E92   (05/2005 — 02/2010)
3' E92 LCI   (11/2008 — 06/2013)
5' E60   (07/2004 — 02/2007)
5' E60 LCI   (10/2005 — 12/2009)
5' E61   (09/2004 — 02/2007)
5' E61 LCI   (11/2005 — 05/2010)
5' F07 GT   (05/2009 — 06/2012)
7' F01   (03/2010 — 06/2012)
X1 E84   (09/2008 — 11/2015)
X3 E83   (01/2003 — 07/2006)



PRICE: $250

PURCHASE LINK: https://twistedtuning.com/collection...-mount-inserts

PHOTOS:

20180317_170001 by Justin Whitted, on Flickr

20180317_003208 by Justin Whitted, on Flickr

20180317_002846 by Justin Whitted, on Flickr

20180318_162235 by Justin Whitted, on Flickr

20180318_180919 by Justin Whitted, on Flickr

[Twisted Tuning]

Ok, so people have been emailing me about Doing urethane mounts on top of the Aluminum inserts. I can do them, but how many people actually want the urethane mounts? I'll make a run immediately if at least 10 to 20 people want them and will be willing to preorder. Let me know by adding your name to list below. Can have them done in about 2 weeks once people sign up and pre-order. 80-90 durometer.

Price will match our Aluminum version at $250

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

[mrshizznat055]

Is this still happening?

Originally Posted by Twisted Tuning

Ok, so people have been emailing me about Doing urethane mounts on top of the Aluminum inserts. I can do them, but how many people actually want the urethane mounts? I'll make a run immediately if at least 10 to 20 people want them and will be willing to preorder. Let me know by adding your name to list below. Can have them done in about 2 weeks once people sign up and pre-order. 80-90 durometer.

Price will match our Aluminum version at $250

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

[Twisted Tuning]

Originally Posted by mrshizznat055

Is this still happening?

if there is interest