Ok now I really need help

chaseb9 · 07-29-2019, 05:58 PM

I just swapped back in my stock DME and CAS and reprogrammed the vin on these modules KLIMA, FRM, DSC, and CTM. I started up the car and have a Lot if lights on and the car is misfiring, Yellow Brake Light, Yellow ABS light, And Yellow Traction Control Light. I’m getting missfires on two cylinders and getting codes, CDAD and a DME shadow code for my fuel pump which is 2AAF. Please someone help me.

stevesingo · 07-30-2019, 03:00 AM

RE DSC, use INPA to run a calibration of the pump and see how that goes.

feuer · 07-30-2019, 03:48 PM

Quote:

Originally Posted by stevesingo

RE DSC, use INPA to run a calibration of the pump and see how that goes.

Calibration for the fuel pump? Do you know the steps fro this procedure in INPA?

stevesingo · 07-30-2019, 05:37 PM

Not fuel pump, DSC pump. I don't know the steps off the top of my head but a search of this site pulled this up...

Open INPA - choose you car - chassis in Script selection - Dynamic Stability control - <F6> (Ansteuern) - <F8> ( Condition Based service (CBS) ) - then reset both (<F1> CBS Reset VA, and <F2> CBS Reset HA ) - all done

You may also need to run <F1><F2>and <F3> under Ansteuern menu
Once all is done, just drive the car a short distance, and it should be fine .

My INPA is in German, so I don`t know the english names for everything

Credit to Kenti

chaseb9 · 08-01-2019, 09:34 PM

Alright fixed all of that. Thank you guys!

07-29-2019, 05:58 PM	#1
chaseb9 Private 25 Rep 76 Posts Drives: 2013 BMW 335i Join Date: Feb 2019 Location: Tallahassee, FL iTrader: (0)	Ok now I really need help I just swapped back in my stock DME and CAS and reprogrammed the vin on these modules KLIMA, FRM, DSC, and CTM. I started up the car and have a Lot if lights on and the car is misfiring, Yellow Brake Light, Yellow ABS light, And Yellow Traction Control Light. I’m getting missfires on two cylinders and getting codes, CDAD and a DME shadow code for my fuel pump which is 2AAF. Please someone help me.
	Appreciate 0 Tweet Quote

07-30-2019, 03:00 AM	#2
stevesingo Private First Class 47 Rep 160 Posts Drives: E90 330i MSport 6MT Join Date: Feb 2014 Location: Cumbria iTrader: (0)	RE DSC, use INPA to run a calibration of the pump and see how that goes.
	Appreciate 0 Quote

07-30-2019, 05:37 PM	#4
stevesingo Private First Class 47 Rep 160 Posts Drives: E90 330i MSport 6MT Join Date: Feb 2014 Location: Cumbria iTrader: (0)	Not fuel pump, DSC pump. I don't know the steps off the top of my head but a search of this site pulled this up... Open INPA - choose you car - chassis in Script selection - Dynamic Stability control - <F6> (Ansteuern) - <F8> ( Condition Based service (CBS) ) - then reset both (<F1> CBS Reset VA, and <F2> CBS Reset HA ) - all done You may also need to run <F1><F2>and <F3> under Ansteuern menu Once all is done, just drive the car a short distance, and it should be fine . My INPA is in German, so I don`t know the english names for everything Credit to Kenti
	Appreciate 0 Quote

08-01-2019, 09:34 PM	#5
chaseb9 Private 25 Rep 76 Posts Drives: 2013 BMW 335i Join Date: Feb 2019 Location: Tallahassee, FL iTrader: (0)	Alright fixed all of that. Thank you guys!
	Appreciate 0 Quote