Problem with FRM3

skrzyneczkaryzu · 08-08-2019, 03:46 PM

Hey

I bought my car with "FRM3" problem. My high beams are switched with fog lights - I mean when I turn on fog lights than my high beams are on, and when I turn on high beams than fog lights are on (the lights on console are fine).

So I thought I need to code it with empty MAN file - didn't work
So I wanted to flash it with winkfp

And I found a problem - I couldn't recognize this module in inpa uif but later I did.
My module is 9230434 - the problem is that winkfp doesn't recognize that - its on the list for frm3 but not on e90???? I found on internet that it was in e70 x5, don't know anything else

How to flash that? Or fix that? FRM gives 1 error - with dimmer - so I don't know if that's related.

Any ideas how to repair that lights? or flash frm3?

skrzyneczkaryzu · 08-08-2019, 03:47 PM

skrzyneczkaryzu · 08-08-2019, 03:48 PM

Red_Bean_Bun · 08-08-2019, 04:17 PM

I could have a look at it via team viewer

skrzyneczkaryzu · 08-08-2019, 04:56 PM

priv

skrzyneczkaryzu · 08-11-2019, 05:04 AM

BUMP

Hey, so I found out that this FRM3 9230434 is from e70 for sure, I added spdaten for e70, and now sa-helper findecu recognize it and shows me zsub 6827063

With spdaten e70 x5 now if I put this 6827063 in winkfp, it wants to flash it.
So it will be ok if I flash this FRM3 with e70 soft and my e90 VIN? Would it survive this process? Or I will kill it eventually?

If that survive, than I should flash it with some e90 soft in winkfp or just code in ncs expert and it will be good in e90?

08-08-2019, 03:46 PM	#1
skrzyneczkaryzu New Member 2 Rep 15 Posts Drives: e90 2010 lci 320d ed Join Date: Mar 2019 Location: pl iTrader: (0)	Problem with FRM3 Hey I bought my car with "FRM3" problem. My high beams are switched with fog lights - I mean when I turn on fog lights than my high beams are on, and when I turn on high beams than fog lights are on (the lights on console are fine). So I thought I need to code it with empty MAN file - didn't work So I wanted to flash it with winkfp And I found a problem - I couldn't recognize this module in inpa uif but later I did. My module is 9230434 - the problem is that winkfp doesn't recognize that - its on the list for frm3 but not on e90???? I found on internet that it was in e70 x5, don't know anything else How to flash that? Or fix that? FRM gives 1 error - with dimmer - so I don't know if that's related. Any ideas how to repair that lights? or flash frm3?
	Appreciate 0 Tweet Quote

08-08-2019, 03:47 PM	#2
skrzyneczkaryzu New Member 2 Rep 15 Posts Drives: e90 2010 lci 320d ed Join Date: Mar 2019 Location: pl iTrader: (0)
	Appreciate 0 Quote

08-08-2019, 03:48 PM	#3
skrzyneczkaryzu New Member 2 Rep 15 Posts Drives: e90 2010 lci 320d ed Join Date: Mar 2019 Location: pl iTrader: (0)
	Appreciate 0 Quote

08-08-2019, 04:17 PM	#4
Red_Bean_Bun Captain 63 Rep 944 Posts Drives: E92 Join Date: Nov 2009 Location: Montreal iTrader: (4)	I could have a look at it via team viewer
	Appreciate 0 Quote

08-08-2019, 04:56 PM	#5
skrzyneczkaryzu New Member 2 Rep 15 Posts Drives: e90 2010 lci 320d ed Join Date: Mar 2019 Location: pl iTrader: (0)	priv
	Appreciate 0 Quote

08-11-2019, 05:04 AM	#6
skrzyneczkaryzu New Member 2 Rep 15 Posts Drives: e90 2010 lci 320d ed Join Date: Mar 2019 Location: pl iTrader: (0)	BUMP Hey, so I found out that this FRM3 9230434 is from e70 for sure, I added spdaten for e70, and now sa-helper findecu recognize it and shows me zsub 6827063 With spdaten e70 x5 now if I put this 6827063 in winkfp, it wants to flash it. So it will be ok if I flash this FRM3 with e70 soft and my e90 VIN? Would it survive this process? Or I will kill it eventually? If that survive, than I should flash it with some e90 soft in winkfp or just code in ncs expert and it will be good in e90?
	Appreciate 0 Quote