|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
FS: Oil Coolers
|
 |
| 10-15-2019, 08:11 PM | #1 |
|
Professional Hack
96
Rep 379
Posts |
FS: Oil Coolers
1 x Setrab 25 row Series 6 oil Cooler with M22 ports - $200 shipped (these are around $275 new) (PN 50-625-7612)
1 x Mishimoto 25 row oil Cooler with male -10AN fittings - $120 shipped (these are about $210 new) (PN Mishimoto MMOC-25BK) If you want to run aftermarket coolers you'll need the Mishimoto Oil Cooler Line Adapter I'm also selling for - $40 If you're interested in both coolers I'll throw in the adapter for free. I ran these coolers on multiple tracks days and never had an issue with either of them, kept my oil temps right below 250 all day. I'm selling to switch to a different oil cooler setup that will work better with my aero plans.
__________________
MCS 1WNR Dampers | Ground Control Camber Plates | E90 M3 front control arms| E90 M3 front tension arm w/ Turner monoball bearings | E90 M3 Steering rack conversion | SPL Adjustable Outer Tie Rod Ends | M3 Rear Camber Arms | SPL Adjustable Rear Toe Arms | M3 Front Caliper Conversion | 275/35/18 Toyo RA1s | 18x9.5ET22 Apex EC-7’s | mFactory LSD | AIM EVO4S with GS Dash | New for 2020: LS1 Swap!
|
 |
| Bookmarks |
|
|
