4x4/brake/dsc lights

Moce72 · 11-29-2019, 03:28 PM

I'm tracking the infamous 4x4/brake/dsc lights on the dash. So far I changed the blown fuse, the driveshaft and the actuator, still lit up, is there anything else I can try, big storm coming need my xdrive lol, any help would be appreciated

relative4 · 11-29-2019, 06:24 PM

What codes do you have?

Soravia · 12-01-2019, 09:15 AM

Did you reset the codes using BMW specific tool to reset and recalibrate the system?
The latter is the key part, not just erasing the code.

If you have 60k miles on winter locations and you haven't changed the oil in transfer case, you're behind. It can kill the bearings on the clutch pack.

pgermaine · 12-06-2019, 10:13 AM

new to this and not sure if im in the right place but my BMW was in limp mode , got it into my garage and checked / cleared the codes and now 4x4 and other lights are on.... car will start but will not move .... completely locked up...even in neutral . any help would be greatly appreciated or even knowledge on where to post since im sure this isn't the right place

relative4 · 12-06-2019, 07:22 PM

Pull the codes and start a thread.

11-29-2019, 03:28 PM	#1
Moce72 Enlisted Member 14 Rep 41 Posts Drives: 2011 335i xdrive Join Date: Sep 2014 Location: Long Island, NY iTrader: (0)	4x4/brake/dsc lights I'm tracking the infamous 4x4/brake/dsc lights on the dash. So far I changed the blown fuse, the driveshaft and the actuator, still lit up, is there anything else I can try, big storm coming need my xdrive lol, any help would be appreciated
	Appreciate 0 Tweet Quote

11-29-2019, 06:24 PM	#2
relative4 Major 620 Rep 1,280 Posts Drives: '08 335xi E90 MT stage 1+ Join Date: Feb 2019 Location: Denver, CO iTrader: (0)	What codes do you have?
	Appreciate 0 Quote

12-01-2019, 09:15 AM	#3
Soravia Captain 117 Rep 598 Posts Drives: 2011 E91 Silver xDrive 6MT Join Date: Apr 2013 Location: Kentucky iTrader: (0)	Did you reset the codes using BMW specific tool to reset and recalibrate the system? The latter is the key part, not just erasing the code. If you have 60k miles on winter locations and you haven't changed the oil in transfer case, you're behind. It can kill the bearings on the clutch pack. Attached Images Last edited by Soravia; 12-01-2019 at 09:23 AM..
	Appreciate 0 Quote

12-06-2019, 10:13 AM	#4
pgermaine New Member 0 Rep 5 Posts Drives: 2006 BMW 330XI Join Date: Dec 2019 Location: PEI,Canada iTrader: (0)	2006 330xi wont move new to this and not sure if im in the right place but my BMW was in limp mode , got it into my garage and checked / cleared the codes and now 4x4 and other lights are on.... car will start but will not move .... completely locked up...even in neutral . any help would be greatly appreciated or even knowledge on where to post since im sure this isn't the right place
	Appreciate 0 Quote

12-06-2019, 07:22 PM	#5
relative4 Major 620 Rep 1,280 Posts Drives: '08 335xi E90 MT stage 1+ Join Date: Feb 2019 Location: Denver, CO iTrader: (0)	Pull the codes and start a thread.
	Appreciate 0 Quote