Advice/Suggestion needed to cover up dealer badge

328xiFromCT · 10-26-2019, 10:22 AM

I removed this hideous dealership badge and there's a white residue in the area that was exposed, it's not glue, I have tried rubbing countless things like wd-40, adhesive remover. I'm not sure if this is clear coat peeling it feels dry/ashy when you rub your hands against it. Was thinking of covering up with perhaps a different badge/ or sticker. Any suggestions or advice? Thanks In advance

tcphoto · 10-26-2019, 10:47 AM

I would try Goo Gone and if that doesn't work apply a little heat to loosen up the adhesive.

328xiFromCT · 10-26-2019, 11:11 AM

Quote:

Originally Posted by tcphoto

I would try Goo Gone and if that doesn't work apply a little heat to loosen up the adhesive.

If you look closely the white blemishes are outside of the area where the adhesive used to be. When I first debadged it I removed all of the adhesive. The white marks have been exposed outside of the badge I'm not sure what that is, it looks like peeling clear coat or something. I will try heat and goo gone

ppointer · 10-26-2019, 11:18 AM

Quote:

Originally Posted by 328xiFromCT

If you look closely the white blemishes are outside of the area where the adhesive used to be. When I first debadged it I removed all of the adhesive. The white marks have been exposed outside of the badge I'm not sure what that is, it looks like peeling clear coat or something. I will try heat and goo gone

Try a cleaner wax. My favorite is Meguiars #6. I get it from Amazon but I have seen it in NAPA and the walmarts.

cpie168 · 10-26-2019, 11:10 PM

If goo gone doesn’t work, I would try to buff it out with a drill attachment buffing pad and scratch remover.

lowrydr310 · 01-07-2020, 02:24 PM

The cleaner wax may work, but you'll likely need something with more cutting power. Meguiars Ultiamte Compound is a pretty good consumer grade product (can't damage the paint) but if applying by hand it might take a lot of work. If you have a DA polisher and cutting pad, that would be your best bet.

If you don't have tools or products, take it to a pro detailer. They'll likely be able to use a cutting pad and compound and get it back to new again. It's pretty amazing what a polisher and compound can do.

edit: Wow, I just responded to a post from three months ago. Guessing the original poster got the issue sorted out by now.

King Rudi · 01-07-2020, 03:25 PM

///M badge and call it a day. Instant 20 whp.....plus you'll look really cool.

Wolf 335 · 01-07-2020, 04:05 PM

How about you try a clay bar on it first, followed by buffing methods mentioned in posts above.

328xiFromCT · 01-20-2020, 09:30 PM

I used a drill with pad, meguiars compound, and polish. Did the trick!! The fade is gone. Thanks guys

328xiFromCT · 01-20-2020, 09:34 PM

Quote:

Originally Posted by Now_Rudi

///M badge and call it a day. Instant 20 whp.....plus you'll look really cool.

I can't say this didn't cross my mind. Also while I'm at it, slap some vents on the fender, that'll really turn some heads

King Rudi · 01-21-2020, 11:40 AM

Quote:

Originally Posted by 328xiFromCT

I can't say this didn't cross my mind. Also while I'm at it, slap some vents on the fender, that'll really turn some heads

Now you're getting it!

10-26-2019, 10:22 AM	#1
328xiFromCT New Member 10 Rep 17 Posts Drives: 2011 BMW 328xi Join Date: Oct 2019 Location: CT iTrader: (0)	Advice/Suggestion needed to cover up dealer badge I removed this hideous dealership badge and there's a white residue in the area that was exposed, it's not glue, I have tried rubbing countless things like wd-40, adhesive remover. I'm not sure if this is clear coat peeling it feels dry/ashy when you rub your hands against it. Was thinking of covering up with perhaps a different badge/ or sticker. Any suggestions or advice? Thanks In advance Attached Images
	Appreciate 0 Tweet Quote

10-26-2019, 10:47 AM	#2
tcphoto Brigadier General 4155 Rep 3,242 Posts Drives: E92 335i 6MT Coupe Join Date: Dec 2009 Location: Nashville, TN iTrader: (1)	I would try Goo Gone and if that doesn't work apply a little heat to loosen up the adhesive. __________________
	Appreciate 0 Quote

10-26-2019, 11:10 PM	#5
cpie168 Major 173 Rep 1,117 Posts Drives: 2010 E90 328i 6MT ZSP BSM Join Date: Mar 2014 Location: K/W and GTA, Ontario, Canada iTrader: (1)	If goo gone doesn’t work, I would try to buff it out with a drill attachment buffing pad and scratch remover.
	Appreciate 1 328xiFromCT9.50 Quote

01-07-2020, 04:05 PM	#8
Wolf 335 Brigadier General 2562 Rep 3,659 Posts Drives: 2007 E92 335i Join Date: Aug 2012 Location: Toronto iTrader: (0)	How about you try a clay bar on it first, followed by buffing methods mentioned in posts above.
	Appreciate 1 328xiFromCT9.50 Quote

01-20-2020, 09:30 PM	#9
328xiFromCT New Member 10 Rep 17 Posts Drives: 2011 BMW 328xi Join Date: Oct 2019 Location: CT iTrader: (0)	I used a drill with pad, meguiars compound, and polish. Did the trick!! The fade is gone. Thanks guys
	Appreciate 1 Wolf 3352562.00 Quote

01-07-2020, 02:24 PM	#6
lowrydr310 Robot 2056 Rep 2,430 Posts Drives: 2006 330i, 2007 E93 335i Join Date: Apr 2013 Location: Souhtrne Califniora iTrader: (1)	The cleaner wax may work, but you'll likely need something with more cutting power. Meguiars Ultiamte Compound is a pretty good consumer grade product (can't damage the paint) but if applying by hand it might take a lot of work. If you have a DA polisher and cutting pad, that would be your best bet. If you don't have tools or products, take it to a pro detailer. They'll likely be able to use a cutting pad and compound and get it back to new again. It's pretty amazing what a polisher and compound can do. edit: Wow, I just responded to a post from three months ago. Guessing the original poster got the issue sorted out by now.
	Appreciate 2 Wolf 3352562.00 328xiFromCT9.50 Quote