[ludoN54]

Hi everybody,
I'm experiencing fuelling issues
Car goes limp without throwing anything on the dash
got 2AAF code

so i just changed LPFP, and then FPR, and still no luck

LPFP sensor read very low ( something like 43 PSI)
what's next ? EKPM ?

https://datazap.me/u/ludovic-poviac/...og=0&data=2-19

[IllSic_Design]

did you change the lpfp sensor?

[ludoN54]

Originally Posted by IllSic_Design

did you change the lpfp sensor?

nope, didn't change it because pressure isn't stuck at the same level.

i would even say it goes down the more i drive.

can be 72 psi in the morning, and 50 a moment later

[IllSic_Design]

I would change the sensor. They don't get stuck at 1 pressure when they go bad, they fluctuate and show sporadic pressures.

[JM98]

Are you on pump gas?

[ludoN54]

Originally Posted by JM98

Are you on pump gas?

yes, running pump gas, 95 ron

just changed the EKPM and nothing change... what's coming next ? LPFP sensor ?

[blown07]

Have you considered changing your LPFP sensor?

[ludoN54]

Originally Posted by blown07

Have you considered changing your LPFP sensor?

Just ordered a new one as it's the only thing i didn't change yet about the low pressure system

really hope it will fix the issue because i don't see what i could do then...change the car ???

[IllSic_Design]

You should always start with the lowest cost (potential)solution in cases like this, which would be the sensor.

[ludoN54]

Originally Posted by IllSic_Design

You should always start with the lowest cost (potential)solution in cases like this, which would be the sensor.

received it, will put it tonight and let you know

[ludoN54]

the lpfp sensor did kind of solved the issue, but i feel like my lpfp sensor read low...
Here is a log =>https://datazap.me/u/ludovic-poviac/...og=0&data=2-19


what do you guys think ?

[IllSic_Design]

Perfectly fine. If it was low 50s or 40s then that's too low.

[stewbets]

Oh yeah, that's LPFP perfection!