HELP!! Possible N55 Engine Failure! VIDEO!

Jeff2886 · 06-19-2017, 04:44 PM

Quote:

Originally Posted by Mad E92

Update: I sourced a rebuilt N55 engine from a engine re-builder on eBay. The rebuilt engine cost $5350 including a $1000 core charge and a $350 freight charge. Honestly anything could've caused this engine to knock. It's not worth trying to figure it out but I think my belt that shredded and entered the front main seal is the cause of my engine failure. I sent it to an indy who dropped the pan to clean all the belt material and get a new gasket. The belt pieces made it's way up to the valve cover via the timing chain which still has debris in it sadly. What I've learned from this whole thing, never let your OFHG leak and to always service your belt. At the end of the day, a $500 job that I should've done sooner would've saved me $7.5k :\

Dude I am living the same nightmare. OFHG went unaddressed for too long, belt blew, bits in the engine, damaged valve.

Can you tell me where you got your engine? Thanks!

Mean E92 · 06-20-2017, 03:42 AM

Quote:

Originally Posted by Jeff2886

Dude I am living the same nightmare. OFHG went unaddressed for too long, belt blew, bits in the engine, damaged valve.

Can you tell me where you got your engine? Thanks!

Look up Ghassan Automotive. Hes on ebay too. Tell him Ali sent you.

Jeff2886 · 06-20-2017, 08:28 AM

Quote:

Originally Posted by Mad E92

Look up Ghassan Automotive. Hes on ebay too. Tell him Ali sent you.

Thanks Ali!

Mean E92 · 06-20-2017, 03:53 PM

Quote:

Originally Posted by Jeff2886

Thanks Ali!

I wish the best of lucky with you dude.

m5james · 04-23-2018, 08:11 PM

Quote:

Originally Posted by Mean E92

Look up Ghassan Automotive. Hes on ebay too. Tell him Ali sent you.

How's your engine holding up or what's your connection with Ghassan? GF's 08 535xiT lost it's first engine around 120k...seems that a leaking injector forced some rod knocking issues and then ultimately the engine failed when piston #1 lunched itself and the engine seized. I picked up a used 75k engine locally and it hasn't even been 10k and this ones got rod noise as well. At this point I'm looking into Ghassan or MMP rebuilt engines with their upgraded rod bearings...something I should have done in hindsight.

TZANIDO777 · 07-16-2018, 11:23 PM

Quote:

Originally Posted by m5james

How's your engine holding up or what's your connection with Ghassan? GF's 08 535xiT lost it's first engine around 120k...seems that a leaking injector forced some rod knocking issues and then ultimately the engine failed when piston #1 lunched itself and the engine seized. I picked up a used 75k engine locally and it hasn't even been 10k and this ones got rod noise as well. At this point I'm looking into Ghassan or MMP rebuilt engines with their upgraded rod bearings...something I should have done in hindsight.

Looking into the same two options. What did you end up deciding with if you dont mind me asking?

m5james · 07-16-2018, 11:47 PM

Haven't started working on her car yet...life, family, etc has gotten in the way. I'm finishing up my 7 so she can drive that, I'll get my X5M back and then I'll start taking her car apart...again :/ Likely going with Ghassen though since we've talked so much via Facebook Messenger.

mjg0915 · 02-12-2020, 05:36 PM

Did you end up going with Ghassan?
If so, could you share how your experience with them turned out?

07-16-2018, 11:47 PM	#51
m5james Colonel 437 Rep 2,062 Posts Drives: '10 X5M Alpine White on Sakhir Join Date: Aug 2015 Location: Marysville, WA iTrader: (0)	Haven't started working on her car yet...life, family, etc has gotten in the way. I'm finishing up my 7 so she can drive that, I'll get my X5M back and then I'll start taking her car apart...again :/ Likely going with Ghassen though since we've talked so much via Facebook Messenger. Attached Images __________________ '10 BMW X5///M - Alpine White on Sakhir Orange - JB4 w/ HCP Stage 2 BEF, NGK 97506 @ .20, SS tubing & BMC filters, gutted cats, AC Forged 312 22's, H&R 2" '98 BMW 740iL - ///E39 M5 6spd swap, fully built engine (sleeved, P&P, cams), 3.46 LSD, H&R Stage 2/Bilstein HD, Magnaflow 14816's '97 BMW 328ci - ///E36 M3 clutch & L/W flywheel, Z4///M 18's
	Appreciate 0 Quote

02-12-2020, 05:36 PM	#52
mjg0915 New Member 4 Rep 9 Posts Drives: 2011 335i E92 Space Gray Met Join Date: Jun 2018 Location: IL, USA iTrader: (0)	Did you end up going with Ghassan? If so, could you share how your experience with them turned out?
	Appreciate 0 Quote