|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
I created a vacuum cleaner attachment to help with car detailing
|
|
02-27-2020, 05:17 PM | #1 |
Captain
434
Rep 780
Posts |
I created a vacuum cleaner attachment to help with car detailing
I added the M3 gauge rings to my car an in doing so got some dust and lint in there. Every time I wipe up a fiber another is left behind.
So, I was brainstorming and thought about the little dental suction device. Obviously that's unrealistic ($$$) so I kinda forgot about it. But later, I came up with something. I found a small vinyl tube - 1/8" id and 3/16" od. I then got a brass barb fitting with an id the same as the tube. I had to heat the tube to get it over the barb. I did this so I didn't have a bottle neck at the fitting. Then, I threaded it into a 2" pvc cap (pick the size that fits your vacuum). I chose to make a gasket with some rubber sheet that goes in the cap, sealing the cap to the hose. The suction holds it in place. |
02-27-2020, 06:27 PM | #3 |
YNWA
1199
Rep 908
Posts |
Use a MF cloth that doesn't have lint?
__________________
/// 2004 Silvergrey M3 · Coupe · 6MT · Slicktop · zero options
/// 2011 Jerez/Bamboo E90 M3 · DCT · Slicktop · IG: @na.s54 |
Appreciate
0
|
02-27-2020, 08:33 PM | #4 |
Lieutenant Colonel
2708
Rep 1,916
Posts |
Necessity is the mother of invention. Red Neck engineering at its finest. Well done
__________________
__________________
"The Constitution was never construed to authorize Congress to infringe the just liberty of the press, or the rights of conscience; or to prevent the people of the United States, who are peaceable citizens, from keeping their own arms.” Samuel Adams |
Appreciate
0
|
02-27-2020, 09:47 PM | #5 |
Captain
434
Rep 780
Posts |
|
Appreciate
0
|
02-27-2020, 10:18 PM | #6 |
Major General
3431
Rep 6,818
Posts |
Use a thin plastic stick and grab it via static or adhesive
Either way, as long as your method worked... you get an atta boy |
Bookmarks |
|
|