New Turner N52 Intake

ECSTuning · 02-12-2019, 01:54 PM

Introducing the new Turner Motorsport N52 Intake for the BMW E8X 1 Series and E9X 3 Series

Turner Motorsport N52 Intake

E9X 3 series and E8X 1 series vehicles equipped with the N52 powerplant are a great blend between modern BMW styling and comfort with the trademark smooth, linear pull that comes from BMW's beautifully engineered inline six powerplant. We love forced induction BMWs, but there's something innately pure about the NA power BMW was able to produce in these cars. No, they're not the fastest, but they are reliable and extremely balanced.

Recognizing the appeal of the naturally aspirated N52 powered E9x vehicles, Turner Motorsport developed in an intake to make you fall in love with your BMW again. The N52 engine never sounded this good. Turner's intake effectively eliminates restriction caused by the factory airbox, especially in the top end. This combined with increased airflow allows for gains of up to 9 WHP and 13 WTQ down low in the power band.

Not only does the intake sound great and perform well, but it also looks amazing, Like any Turner Motorsport project, their N52 intake is CAD designed by an in-house team of engineers - and it shows. The heat shield is wrinkle black powder coated CNC aluminum - featuring pre-installed edge trim and a Turner brand plate. The heat shield is held to tight tolerances to keep hot engine bay air away from the intake, while retaining factory air inlet scoop compatibility to bring in cool, fresh air. Turner's intake also features a 6061-T6 CNC machined aluminum MAF housing that maintains factory MAF scaling. Lastly, the blue Turner filter is cleanable and reusable - featuring 8 ply oiled cotton gauze and a bell mouth inlet to maximize flow and filtration efficiency.

Installation is very simple, and Turner is thorough enough to put together install instructions for your enjoyment - see the documentation tab.

Features:
Wrinkle Black Powdercoated CNC aluminum heat shield
Precision fit heat shield provides fresh cool air to the intake while keeping hot engine bay air out
Pre-installed edge trim
Maintains OE fresh air inlet scoop
6061-T6 CNC machine Aluminum MAF housing maintains OEM MAF scaling
3" conical hi-flow reusable air filter
8 ply oiled cotton gauze construction
Bell mouth inlet to maximize flow and filtration efficiency

Performance Intake Upgrade

E82 128i N52
E88 128i N52
E9X 325i N52
E9X 325xi N52
E9X 328i N52
E9X 328xi N52
E9X 330i N52
E9X 330xi N52

bladsville · 02-13-2019, 11:57 AM

Is the silicone tube included in the intake setup or will that have to be purchased separately?

ECSTuning · 02-13-2019, 12:55 PM

Two (ok technically 3) options. Option 1 keep your stock boot, option 2 go with a Turner intake boot (with a choice of blue or black).
-James

ECSTuning · 01-07-2020, 11:55 AM

Ready for the ultimate intake for your N52?

matthewjmoser · 03-31-2020, 05:20 PM

has anyone bought this. reviews from customers? dyno results?

02-12-2019, 01:54 PM	#1
ECSTuning New Lifetime Replacement Policy 843 Rep 11,738 Posts Drives: Independent Tuning Specialists Join Date: Jul 2008 Location: Ohio iTrader: (18)	New Turner N52 Intake \| +9 WHP +13 WTQ Introducing the new Turner Motorsport N52 Intake for the BMW E8X 1 Series and E9X 3 Series Turner Motorsport N52 Intake E9X 3 series and E8X 1 series vehicles equipped with the N52 powerplant are a great blend between modern BMW styling and comfort with the trademark smooth, linear pull that comes from BMW's beautifully engineered inline six powerplant. We love forced induction BMWs, but there's something innately pure about the NA power BMW was able to produce in these cars. No, they're not the fastest, but they are reliable and extremely balanced. Recognizing the appeal of the naturally aspirated N52 powered E9x vehicles, Turner Motorsport developed in an intake to make you fall in love with your BMW again. The N52 engine never sounded this good. Turner's intake effectively eliminates restriction caused by the factory airbox, especially in the top end. This combined with increased airflow allows for gains of up to 9 WHP and 13 WTQ down low in the power band. Not only does the intake sound great and perform well, but it also looks amazing, Like any Turner Motorsport project, their N52 intake is CAD designed by an in-house team of engineers - and it shows. The heat shield is wrinkle black powder coated CNC aluminum - featuring pre-installed edge trim and a Turner brand plate. The heat shield is held to tight tolerances to keep hot engine bay air away from the intake, while retaining factory air inlet scoop compatibility to bring in cool, fresh air. Turner's intake also features a 6061-T6 CNC machined aluminum MAF housing that maintains factory MAF scaling. Lastly, the blue Turner filter is cleanable and reusable - featuring 8 ply oiled cotton gauze and a bell mouth inlet to maximize flow and filtration efficiency. Installation is very simple, and Turner is thorough enough to put together install instructions for your enjoyment - see the documentation tab. Features: Wrinkle Black Powdercoated CNC aluminum heat shield Precision fit heat shield provides fresh cool air to the intake while keeping hot engine bay air out Pre-installed edge trim Maintains OE fresh air inlet scoop 6061-T6 CNC machine Aluminum MAF housing maintains OEM MAF scaling 3" conical hi-flow reusable air filter 8 ply oiled cotton gauze construction Bell mouth inlet to maximize flow and filtration efficiency Performance Intake Upgrade E82 128i N52 E88 128i N52 E9X 325i N52 E9X 325xi N52 E9X 328i N52 E9X 328xi N52 E9X 330i N52 E9X 330xi N52
	Appreciate 0 Tweet

02-13-2019, 11:57 AM	#2
bladsville Enlisted Member 26 Rep 43 Posts Drives: E91 6MT Join Date: Feb 2017 Location: DFW iTrader: (0)	Is the silicone tube included in the intake setup or will that have to be purchased separately?
	Appreciate 0

02-13-2019, 12:55 PM	#3
ECSTuning New Lifetime Replacement Policy 843 Rep 11,738 Posts Drives: Independent Tuning Specialists Join Date: Jul 2008 Location: Ohio iTrader: (18)	Two (ok technically 3) options. Option 1 keep your stock boot, option 2 go with a Turner intake boot (with a choice of blue or black). -James
	Appreciate 0

01-07-2020, 11:55 AM	#4
ECSTuning New Lifetime Replacement Policy 843 Rep 11,738 Posts Drives: Independent Tuning Specialists Join Date: Jul 2008 Location: Ohio iTrader: (18)	Ready for the ultimate intake for your N52?
	Appreciate 0

03-31-2020, 05:20 PM	#5
matthewjmoser Second Lieutenant 56 Rep 294 Posts Drives: 2011 328xi Join Date: Feb 2015 Location: Long Island iTrader: (0)	has anyone bought this. reviews from customers? dyno results?
	Appreciate 0