[jaysone90]

This was an issue before I had done any kind of coding. Through the FRM coding which would be FRM87 aka FRM1, where can I make sure that the stalk feature is enabled to allow my e90 to display bi xenons full power when I push the stalk forward?

Most of you know how bixenon's work, when you push forward on the stalk its suppose to tilt the shutter. I don't know if i have to do some kind of reset, but I am not having any luck on my end. There are no short counters on any of my lights and everything is fine. I had rewired both headlights from scratch because the cables were freying.


If there are things you guys can have me look at in NCS expert/ncs dummy to make sure that is on let me know.

[Tunafish]

I am guessing the bi-xenon are not factory? That will be your problem..

https://www.bimmerforums.com/forum/s...hts&styleid=51

[matteblue3er]

No all US spec 330s came standard with bi-xenon

For this model year, pushing the stalk forward activates the halogen inner high beams. Pulling the stalk toward you activates the shutter for the xenons until you pull or push the stalk to turn them off.

Do your inner lights work as DRLs? If they don't turn on at all, maybe there is some other issue than coding

[jaysone90]

Originally Posted by matteblue3er

No all US spec 330s came standard with bi-xenon

For this model year, pushing the stalk forward activates the halogen inner high beams. Pulling the stalk toward you activates the shutter for the xenons until you pull or push the stalk to turn them off.

Do your inner lights work as DRLs? If they don't turn on at all, maybe there is some other issue than coding

Matte I fully understand that. My bixenon's are not retrofitted. My car is an e90 with the sports package 2006 330. These lights came standard with my model.

All of the lights are working as normal, my inner h7 drl's turn on but I have them off by default. They allow me to flash to pass. So we aren't having an understanding of how my bixenons are suppose to work.

As I said, pushing the stalk forward doesn't allow the shutter to move like it used to.