[don40vette]

This is my first try at using this and I have encountered this problem.

When I do a Load TRC-File and then click on Show Values I get "not all parameters found"

I go back to the FSW_PSW file and delete all the invalid coding, making sure there are no spaces between the invalid coding and the good coding. Save it.
Go back to Coding Tool, Load TRC-File, Show Values and I get the same exact thing.

When I look at the FSW_PSW file it has the correct time stamp of when I saved it.

Appreciate any help

[Joe@TopGearSolutions]

Originally Posted by don40vette

This is my first try at using this and I have encountered this problem.

When I do a Load TRC-File and then click on Show Values I get "not all parameters found"

I go back to the FSW_PSW file and delete all the invalid coding, making sure there are no spaces between the invalid coding and the good coding. Save it.
Go back to Coding Tool, Load TRC-File, Show Values and I get the same exact thing.

When I look at the FSW_PSW file it has the correct time stamp of when I saved it.

Appreciate any help

When loading the TRC file, make sure you're not using sorting in the coding tool. Then, scroll down the bottom to see what lines are in red after you get that message.

Then, go back to your TRC, and those lines will be all the way at the bottom. Highlight and delete all of them.

Also, make sure you have the correct file version (e.g., CIC.C1A) selected in the coding tool.