Coding Bluetooth Handsfree

Cole122 · 03-09-2021, 11:53 PM

Hello,

I am working on retrofitting in the hands-free bluetooth into my March 2011, E90 that has 6FL and the combox included from the factory.

I have roughly sorted out the hardware requirements, however I am trying to get the HU coded before I purchase anything. I have seen other members in the past simply code $644 into the VO to enable BT using NCSExpert. However, i have also heard they may be some problems coding the newer units as mine was produced 02.25.11

Has anyone coded the newer professional HU for BT? Ideally wanted to code by myself over DCAN rather than hire out.

ctuna · 03-10-2021, 01:45 PM

http://www.e90post.com/forums/showthread.php?t=687463

This one has more info

https://www.e90post.com/forums/showthread.php?t=1036190

For cars made after 3/07 the common/uncommon knowledge is you
need a ICOM cable to program most Bus Modules.

There is a Most and Non Most version but if the Non Most can be programmed
without a ICOM I don't know.

Can't use the non Most version with Most devices obviously no Logic 7.

03-09-2021, 11:53 PM	#1
Cole122 New Member 0 Rep 6 Posts Drives: 2011 BMW 328i Join Date: Apr 2020 Location: USA iTrader: (0)	Coding Bluetooth Handsfree - Newer Professional Radio Hello, I am working on retrofitting in the hands-free bluetooth into my March 2011, E90 that has 6FL and the combox included from the factory. I have roughly sorted out the hardware requirements, however I am trying to get the HU coded before I purchase anything. I have seen other members in the past simply code $644 into the VO to enable BT using NCSExpert. However, i have also heard they may be some problems coding the newer units as mine was produced 02.25.11 Has anyone coded the newer professional HU for BT? Ideally wanted to code by myself over DCAN rather than hire out.
	Appreciate 0 Tweet Quote

03-10-2021, 01:45 PM	#2
ctuna Lieutenant General 2054 Rep 13,384 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	http://www.e90post.com/forums/showthread.php?t=687463 This one has more info https://www.e90post.com/forums/showthread.php?t=1036190 For cars made after 3/07 the common/uncommon knowledge is you need a ICOM cable to program most Bus Modules. There is a Most and Non Most version but if the Non Most can be programmed without a ICOM I don't know. Can't use the non Most version with Most devices obviously no Logic 7. Last edited by ctuna; 03-10-2021 at 01:53 PM..
	Appreciate 0 Quote