[Macman45]

Quick question on what all I should code after retrofitting bluetooth. My car had bluetooth prep, so had the wiring and I just popped in a mic and antenna, bought a TCU off of here and connected everything and it works great, places and answers calls perfect, all without coding. However, I am getting the SOS with a slash through it on start it, and the exclamation point next to Drive constantly, assuming since it can't find the BMW Assist equipment which I don't want.

My question is what else should I code besides changing the VO to include $644?

I think I need to disable all SOS/Assist features.

Last question, is voice control possible with my setup with coding or just forget it? Thanks

[Macman45]

Added it, error stays. Coded Kombi with a few other things and updated, error is still there.

[Macman45]

PM Sent! Thanks

[Macman45]

@BimmerGeeks is the MAN!!! Got me all squared away. Ended being way more involved than I could do and he NAILED it! Thank you again

[LMB335IS]

Care to share the details?

[Macman45]

Originally Posted by LMB335IS

Care to share the details?

BimmerGeeks will be able to explain better, but long and short of it is my TCU module wasn't even showing as an installed Module until the proper VO was added for BMW Assist. That's why +TELD did nothing, since that's only for the MULF. He added in the proper VO then deactivated BMW assist from the TCU module itself, and left hands free Bluetooth.

Thanks for all your help!!

[LMB335IS]

Originally Posted by Macman45

BimmerGeeks will be able to explain better, but long and short of it is my TCU module wasn't even showing as an installed Module until the proper VO was added for BMW Assist. That's why +TELD did nothing, since that's only for the MULF. He added in the proper VO then deactivated BMW assist from the TCU module itself, and left hands free Bluetooth.

Thanks for all your help!!

Cool, like I said, they're good. It definitely helps knowing the correct VO options to add or delete.

[walshjbrian]

Hi

I think i'm having the same issue.

I bought a TCU from ebay and everything is working apart from that dam SOS error message every start up taunting me.

I've tried adding +TELD and default coded CAS And FRM and Kombi

I noticed multiple forums talking about editiing values in TCUM, but i go to process ECU there TCUM isn't in the list.

If you have the steps that you did to resolve this I'd appreciate it.

Thanks

Brian

[walshjbrian]

Hi

No longer having the issue, had to add $612 and $639 to my VO.

This got the TCUM menu to show up.

After that was able to code out the sos error.

Thanks

Brian

[Luillo]

Originally Posted by BimmerGeeks

Definitely threw me for a loop. Most complicated SOS delete I've had to do, was interesting though.

I installed the Eonon GA9365 on my e90 and now I have SOS light malfunction and its annoying looking at it. How can i get rid of this light.

[ctuna]

http://www.e90post.com/forums/showthread.php?t=805677
entry 9 is the one that does it.
These lines are in the Kombi (instrument panel module)

And unplug the TCU /Mulf

[sam9116]

Originally Posted by walshjbrian

Hi

No longer having the issue, had to add $612 and $639 to my VO.

This got the TCUM menu to show up.

After that was able to code out the sos error.

Thanks

Brian

Thank you, after looking everywhere this finally did it for me!