[Hotter]

Hi, I was not able to code BMW Professional Radio with regular K+DCAN cable, so I have borrowed this cable from mechanic:



This cable connect to USB port. I have never coded with this. How to setup it? Is it possible to code with it connected to PC directly?

[ctuna]

https://www.e90post.com/forums/showthread.php?t=1817964
yes you have to change the interface settings K/D can is not the same as ICOM see
above link.

Where is the rest of the cable?

I don't see how you can code anything without a PC no matter what cable you use.
Unless you use one of those canned phone apps which are somewhat limited.

[Hotter]

Originally Posted by ctuna

Where is the rest of the cable?

I mean can I code with this adapter connecting directly to PC via USB? Or I must connect this adapter to "the box" and then via Etherned to my PC?



As I dont have this box only MOST adapter which connects to USB.

[mizta insane]

That device is only needed for flash programming not for coding.

Also it needs to be connected to icom and the icom connects to the pc.

[Brendanssound]

Man don't take this personally but you seem to be way over your head here.

Might be a better idea to stick to the k-dcan cable and just explain what you've done and whats not working

[ctuna]

When you buy and Icom you get the whole kit.
https://www.bimmerforums.com/forum/s...-P-actually-do

there is some cable info in the above thread.

It does seem that it is required to have an Icom for Most Bus devices after
a certain date. Mostly I have seen the Head Units as the choke point.

[Hotter]

Just received Bimmerlabs (bimmergeeks) cable. I was able to read RAD22 module which I was not able to read with regular K+DCAN cable!!!