[tdmallinbmw]

Would love to order one of these harnesses. With the harness I could link to an amp and speakers?

[Technic]

Please use PM for details.

[djbordie]

same issues here...no idea where to get a harness here in canada.

id be willing to get something shipped to a usa PO border box and eat the extra cost if no one is willing to send me one top side... (canada)

any takers?

[Technic]

Originally Posted by djbordie

same issues here...no idea where to get a harness here in canada.

id be willing to get something shipped to a usa PO border box and eat the extra cost if no one is willing to send me one top side... (canada)

any takers?

http://www.e90post.com/forums/showpo...5&postcount=24

[djbordie]

Originally Posted by Technic

http://www.e90post.com/forums/showpo...5&postcount=24

thank you sir, will do when I have PM privelages...

couple days i hope...haha

[FLYT89]

Technic I want to buy a harness but i dont have private message privledges, could you please email me: king.jonathan@yahoo.com

[OveN]

Hello Technic, I am looking to buy two harnesses: one for a Base/Stereo system and one for a HiFi (option 676) system. Both cars will be using JL Audio HD900/5 amplifier.

I realize it could be some time before you have either available but at least I can get in on the "waiting list" perhaps?

I do not have PM rights yet, could you please email me at ovenyhus@msn.com
If you do not ship out of the US I have a friend over there to ship to.
Thanks and looking forward to your reply

[joey0909]

I need a harness for the jl xd 600/6 for a 2010 328i with base stereo( no amp). I do not have PM privileges yet. you can email me at provrulz@yahoo.com with details.

[andrew328xi]

Hey guy I just I got my 1st bmw and I noticed I have the crappy base sound system in it. I was wondering what I need to do to get an aftermarket amp hooked up? Im sure this as been answered but not understanding completely. If anybody could help me out please let me know thanks

[ctuna]

andrew please read this sticky

http://www.e90post.com/forums/showthread.php?t=641323

[Dr Bomba]

Hi, I have some questions about your harness. I will PM you Technic when I get PM rights.

[Yago]

Hey guys I had the misfortune of having some wires cut. Now no sound from radio and all other notification sounds. Can anyone help? Pic inserted shows where the damage occurred. Trunk leading to amp.

[McPikie]

Originally Posted by Technic

http://www.e90post.com/forums/showpo...5&postcount=24

Hey Technic, I know this is a mega old bump, but I've just picked up an E60 with the standard base stereo and CCC professional nav.

From my very limited knowledge, the speakers powered from the headunit with no amp and no tweeters. OK, cool. I am looking at the MB Quarts upgrade kit with the additional tweeters, mids and floor woofers. I was thinking just adding them for now and seeing how it sounds, but knowing at heart I will need an amp.

I have an older JL Audio £6450 with high level input, so from what I can see, I can simply take the feed from the underfloor subs to the JL amp, and then run the wires back to the floor subs on their own. Or, can I also feed the door speakers too (it's a 6 channel amp).

I guess it makes it hard with me having no OEM amp in the trunk already.

Any advice you can offer would be greatly appreciated

[ctuna]

Technic has not been on this board for years now.

to the guy with the broken wires they are color coded at least for the stereo wires
so you should be able to put them back together. .
The fiber lines will have to be replaced.

https://www.e90post.com/forums/showthread.php?t=138949

[McPikie]

Originally Posted by ctuna

Technic has not been on this board for years now.

Yeah, I just remembered to use the search function, 2019 last visit.

Does anyone else do the harnesses, or could help in my plight?

[andrewbr]

Originally Posted by McPikie

Yeah, I just remembered to use the search function, 2019 last visit.

Does anyone else do the harnesses, or could help in my plight?

Technic still makes the harnesses, order off his website https://technicpnp.com/

Audison and Eton also make similar harnesses for base audio system BMWs.

[McPikie]

Originally Posted by andrewbr

Technic still makes the harnesses, order off his website https://technicpnp.com/

Audison and Eton also make similar harnesses for base audio system BMWs.

Cheers bud

[McPikie]

So, I emailed Technics, and they simply diverted me back to their website

https://technicpnp.com/product-categ...-5-series-e6x/

There's 3 harnesses to chosen from. If I wanted to run my e6450 amp, which harness should I chose? I'm thinking the 2/4 harness and I can then only run 4 of my available channels.

Or is there a way I could splice the harness/RCAs to run channels 1&2 back to the front doors, then bridge channels 3&4 and 5&6 to the floor subs? Or would that just be overkill?

[ctuna]

The 4/6 harness runs all hi fi positions it is essentially a Hi Fi harness.

https://technicpnp.com/product-categ...-3-series-e9x/

He does explain this .

Stereo 4/6 harness

$135.00 – $175.00

The Stereo 4/6 is used with a 6-channel amp to power the front, rear and underseat woofers individually (one channel per speaker). Remote turn on included. Removal of the OEM HU/iDrive unit is required.

Stereo 4/6 harness kit includes:

Quadralock harness for OEM HU interface
(2) 15′ long input/output cables with remote turn on signal
(4) OEM speaker connectors
(2) OEM woofer connectors
(2) OEM woofer connector jumpers (separate woofers from front speakers)

"The OEM Stereo system is:

– OEM HU/iDrive powering front, rear and underseat woofers
– 4 channel output split into 6 speakers: front speakers connected in parallel with underseat woofers
– front outputs are full range, rear outputs are high passed
– (4) 4″ mids and (2) 6.5″ woofers. No tweeters
– 15W x 4 (Professional Radio)/25W x 4 (iDrive) max power high level outputs

The Stereo 4/6 is used with a 6-channel amp to power the front, rear and underseat woofers individually (one channel per speaker). Remote turn on and woofer jumpers included. Removal of the OEM HU/iDrive unit is required.

The Stereo 4/6 harness requires a processor to flatten/de-EQ the iDrive/OEM HU outputs or component speakers than can lower the built-in treble boost of the OEM signal. Coding of the OEM HU/iDrive to output HiFi (balanced, low level outputs) would not require a processor/de-EQ, but it will require balanced-inputs aftermarket amps and RCA termination.

The Stereo harness is designed for experienced DIYer’s and/or professional installers. Ordering of the Stereo harness does not include install support of any aftermarket equipment. Support is limited to problems or/and warranty with the harness "

this is right from his web sight.

Program head unit to Hi Fi to get around eq problems and to use low level inputs.
This bypasses the need for an eq flattening device.


http://www.e90post.com/forums/attach...5&d=1493273253



Base system upgrades
http://www.e90post.com/forums/showthread.php?t=445266
http://www.1addicts.com/forums/showthread.php?t=634957
http://f30.bimmerpost.com/forums/sho....php?t=1003810
http://www.e90post.com/forums/showthread.php?t=822366
http://www.e90post.com/forums/showthread.php?t=581379
http://www.e90post.com/forums/showthread.php?t=451941
http://www.e90post.com/forums/showthread.php?t=540954
http://www.e90post.com/forums/showth...ghlight=Dotech
http://www.e90post.com/forums/showthread.php?t=495855
http://www.e90post.com/forums/showthread.php?t=494299
http://www.diymobileaudio.com/forum/...morel-jbl.html
http://www.e90post.com/forums/showth...ht=amp+upgrade
http://www.bimmerfest.com/forums/sho...d.php?t=550771
http://www.e90post.com/forums/showth...1#post16679904
http://www.e90post.com/forums/attach...1&d=1411521234
http://www.e90post.com/forums/showthread.php?t=1378833
base system wiring pre/post 3/09
http://www.e90post.com/forums/showth...1#post16679904

[McPikie]

I don't want to power the rear speakers though, just the front doors and floor subs

[ctuna]

http://www.e90post.com/forums/attach...5&d=1493273253

https://technicpnp.com/product/stereo-24-harness/
2/4 harness splits the parallel connection for the fronts.
If you want to bridge channels I recall the stock wiring was good for 150 watts a channel
but you should check this.

Anyway there are descriptions of each harness setup if you select it at technics website.