[Newbie12345]

Bmw 325d 2011 with idrive cic and combox

The aux doesnt play music neither does the usb on a stick.(both in the armrest) The usb charges though.

The bluetooth just says please wait and doesnt change from that screen.

Have tried to update but the idrive says that there is no previous software version and it reads no usb in the armrest usb slot to update it.

I have formatted the usb and got the correct file on it. Ive reset the idrive by holding the mute for 30 secs. I have also checked the combox connections. The fuses have been quickly checked but i wasnt entirely sure which ones to check.

Someone please help... this is a minor issue but flicking between radio 1 and the 3 different heart stations is getting a bit tedious!

[E60525d]

Originally Posted by Gp121

Bmw 325d 2011 with idrive cic and combox

The aux doesnt play music neither does the usb on a stick.(both in the armrest) The usb charges though.

The bluetooth just says please wait and doesnt change from that screen.

Have tried to update but the idrive says that there is no previous software version and it reads no usb in the armrest usb slot to update it.

I have formatted the usb and got the correct file on it. Ive reset the idrive by holding the mute for 30 secs. I have also checked the combox connections. The fuses have been quickly checked but i wasnt entirely sure which ones to check.

Someone please help... this is a minor issue but flicking between radio 1 and the 3 different heart stations is getting a bit tedious!

Had a similar issue. Was resolved by resettng combox module using NCS expert.

[pfactor]

Originally Posted by E60525d

Had a similar issue. Was resolved by resettng combox module using NCS expert.

Looking for some advice on this. I tried to read the MEDIA module with CODIEREN_LASEN in my 2012 328i E93 and got the error in this picture. Does this mean that:
1) the module is physically not connected or simply broken and needs to be replaced
OR
2) does it mean that I need to re-set it by coding it from the FA/VO?

I didn't want to try #2 without asking in here first.

[ctuna]

Have you ever had the diagnostic running?
If this is your first time setting up diagnostics with a K/D can cable
there is good chance you missed something with the setup.
Also Windows updates will mess with your setting's forcing
you to set up the port and latency again.
I always use Inpa first then check the settings.
(functional jobs in Inpa reads the modules)

[pfactor]

The combox itself was bad, replaced it and plugged in the new one and it worked no problem with no coding.