|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CCC module still not working!!
|
|
11-28-2021, 12:35 PM | #1 |
Private
11
Rep 92
Posts |
CCC module still not working!!
I was driving one night when all of a sudden my radio, radio lights, and I drive screen shut off, I checked the fuse for the I drive, reset battery, hard reset on I drive and nothing, I went to the junk yard and found a ccc module exactly like the one I have now. (Not the module with 8 buttons) I installed and it didn't fix it my issue, screen is still black and no music. Do I need to code anything to get i drive or music to turn on? The car I pulled the ccc module off was dead with no battery so I can't verify if it worked but it was worth a shot.
__________________
Derek Keenan
|
11-29-2021, 10:48 PM | #2 |
New Member
5
Rep 11
Posts |
There are multiple fuses I believe for the ccc system. Did you check them all ? Next step would be to check the unit is actually getting power at the cable that goes into the back of the unit with a multimeter. I’m trouble shooting a non functioning idrive controller wheel and buttons right now … hope you find your solution !
|
Appreciate
0
|
12-02-2021, 07:05 PM | #3 | |
Private
11
Rep 92
Posts |
Quote:
__________________
Derek Keenan
|
|
Appreciate
0
|
12-02-2021, 10:37 PM | #4 |
Lieutenant General
2054
Rep 13,385
Posts |
There is one at the back of the Unit in addition to the
ones in the Cabin Fuse board. Checking the power with a volt meter is recommended. |
Appreciate
0
|
Bookmarks |
Tags |
ccc module, ccc navigation, idrive |
|
|