PCV Breather Hose Broken Tab

thatllbe2000bucks · 03-07-2022, 05:45 PM

While replacing my turbos I was checking out my occ and managed to break a tab on the breather hose. Will this cause pressure issues? I really don’t want to replace it as I just did 200 miles ago.

studio54 · 03-08-2022, 06:32 AM

You can use a clamp if it's the same place :

thatllbe2000bucks · 03-08-2022, 10:26 AM

Quote:

Originally Posted by studio54

You can use a clamp if it's the same place :

Good idea I’ll do that. It’s on the other side, but it should fit. For now it seems like there are no issues the hose itself isn’t coming off.

studio54 · 03-08-2022, 10:37 AM

Quote:

Originally Posted by thatllbe2000bucks

Good idea I’ll do that. It’s on the other side, but it should fit. For now it seems like there are no issues the hose itself isn’t coming off.

If it's on the other side, after the check valve, it should only see suction from the inlet and no pressure, I also broke one tab, but on the small electrical heater connection at the inlet, I just installed it back with the broken tab (it has an o-ring) and wrapped a bit of strong tape around just by safety.

BSM n54iS · 03-08-2022, 02:38 PM

If it still snaps on there it's fine, I literally just broke it as that picture shows doing my cowl delete harness and said fuck it

03-07-2022, 05:45 PM	#1
thatllbe2000bucks Enlisted Member 6 Rep 36 Posts Drives: BMW E93 335i Join Date: Dec 2021 Location: Latvia iTrader: (0)	PCV Breather Hose Broken Tab While replacing my turbos I was checking out my occ and managed to break a tab on the breather hose. Will this cause pressure issues? I really don’t want to replace it as I just did 200 miles ago.
	Appreciate 0 Tweet Quote

03-08-2022, 06:32 AM	#2
studio54 Captain 203 Rep 714 Posts Drives: n54 Join Date: Feb 2017 Location: belgium iTrader: (0)	You can use a clamp if it's the same place : __________________ beter laat dan nooit
	Appreciate 0 Quote

03-08-2022, 02:38 PM	#5
BSM n54iS Brigadier General 2682 Rep 4,203 Posts Drives: '11 335is \| '16 Macan Turbo Join Date: Aug 2015 Location: Everywhere and Nowhere iTrader: (7)	If it still snaps on there it's fine, I literally just broke it as that picture shows doing my cowl delete harness and said fuck it __________________ '11 335is BSM MT "BMW Performance Editon" \| '16 Porsche Macan Turbo GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 1 1Bad335turbopsi60.00 Quote