[remus0597]

hello
The pictures with my headlights are the ones with both headlights, the fourth one is from the internet

Have you seen anything like it?
can i fix this without changing the lens?

[BB_cuda]

Projector is mounted in what I call a gymbal. I wonder if your gymbals are properly fastened into the outboard and inboard sockets. Separate from each other, each socket is for adjusting the height (outboard) and left/right aim (inboard). If one of the two is un clipped in, it possibly could cause the rolled angle. I would perhaps pull rear cover of one of the two lights and see if you twisting the projector body (please don't shock yourself) while light on changes the leaning angle you have. Point is to see if there is alot of play now. There is normally a little bit of flexibility, not super rigid.

Did you hit a bad pot hole of bump and this change the flat angle to rolled one?

[remus0597]

that's how it's been since I bought the car. i noticed this late
recently, i saw someone looking inside the headlight (on youtube). it has an extraordinarily high play compared to its headlights
I hope what you said above, that's what i want it to be, it seems the cheapest and simplest solution.
In 2-3 months I will change the glass, i will see then what it is.
Thank you very much!!!!
Any possibility comes to your mind, write it, he helps me