Has anyone successfully changed the dash color?

mashimarho · 09-09-2010, 01:53 PM

I was thinking about changing the dash, gauge, interior light color if possible. Has anyone heard or done it before? If so, how hard is it?

Thanks

Chew · 09-09-2010, 02:42 PM

This guy did it... doesn't go into detailed specifics, but doesn't sound like a simple backdrop change.

http://www.e90post.com/forums/showth...362673&page=12

Noxious_ · 09-09-2010, 04:58 PM

Ive heard its really hard and not worth it.

Plus if you mention that on this forum you get a load of people telling you that you should just get a civic.

LuvMyRide · 09-09-2010, 05:25 PM

Yes. I have.

moto_noob · 09-09-2010, 06:08 PM

I did it. Wasn't hard at all.

mashimarho · 09-10-2010, 10:48 AM

well....?? pictures? suggestions?

moto_noob · 09-11-2010, 09:11 AM

done this just a few days ago. you'll need 12 smd leds, size 3528.

cn555ic · 09-11-2010, 09:44 AM

Me 2

cn555ic · 09-11-2010, 09:45 AM

Quote:

Originally Posted by Noxious_

Ive heard its really hard and not worth it.

Plus if you mention that on this forum you get a load of people telling you that you should just get a civic.

I dont think so.

dragazn · 09-11-2010, 10:10 AM

Quote:

Originally Posted by moto_noob

done this just a few days ago. you'll need 12 smd leds, size 3528.

how goes the install, any DIY????

moto_noob · 09-11-2010, 10:52 AM

1.) remove dash by unscrewing 2 torx screws at the top of the dash
- move the steering wheel down as much as possible, then you'll be able to squeeze the dash out, no need to remove steering wheel
2.) unplug the dash harness located at the back of the dash
3.) there are 4 torx screws holding the dash together, next unclip the dash apart.
4.) use a flat head screwdriver, or something flat, to pry the needles out.remember to put like a playing card/paper between the needle and dash so you won't scratch it
5.) pull the dash apart.
6.) on the backside of the circuit board, around the needle pins, are the smd leds. there are 4 located around each large needle, and 2 around each small needle.
7.) unsolder the leds, remember to write down the direction of the smd, or you can just do it one at a time
8.)put the dash back together, but not the big window face. plug it back into your car
9.) (this is to get the needles back into the right position) do the 2.00 KI test, by press and hold the odometer reset button, then plugging in the key, and then press the odometer button til you get to 2.00 KI test. do the test. this will move the needles, after test is done, move the needles into proper position. do ki test again to see if the needles are moving correctly.
10. now put the face back on, then put dash back into car

jesdan14 · 09-11-2010, 11:42 PM

where did u get the leds from?

dirtyylicous · 09-11-2010, 11:54 PM

I love the way this looks. I thought it would look weird with the rest of the orange but surprisingly it looks great! I was just wondering if anyone did all the lights in white. Just curious to see how itd look

spdy330 · 09-12-2010, 01:54 AM

That does look good and would look better if everything else matched.

moto_noob · 09-12-2010, 01:50 PM

just ordered some smd leds off ebay. gonna change them out though, going to try to find ones a bit brighter

g_rant · 09-12-2010, 06:43 PM

any where else to get the LED lights?

doggiedog · 09-13-2010, 12:43 AM

Does the cruise control light shine through the white light or does it get washed out?

moto_noob · 09-13-2010, 01:22 AM

Cruise control still shows

purplerocket · 09-20-2022, 11:11 AM

its very simple but you need soldering iron some pliers to remove needles and good quality leds from alliexpress they have brighter than original m3 dash. i can help you if you but there are a lot of videos on youtube for uninstall of dash. just be careful uninstalling needles and installing them not too much pressure cause you ca brake the motor and when you unsolder on led chip you install the new one on the same way

09-09-2010, 01:53 PM	#1
mashimarho BimmerPost Supporting Vendor 2141 Rep 13,877 Posts Drives: E92 M3 & F80 M3 & G82 M4 Join Date: Mar 2010 Location: Lynnwood, WA iTrader: (45) Garage List 2021 BMW G82 M4 [0.00] 2011 BMW E92 M3 [0.00] 2015 BMW F80 M3 [0.00] 2012 BMW 335i xDrive [9.78]	Has anyone successfully changed the dash color? I was thinking about changing the dash, gauge, interior light color if possible. Has anyone heard or done it before? If so, how hard is it? Thanks
	Appreciate 0 Tweet Quote

09-09-2010, 02:42 PM	#2
Chew New Member 13 Rep 29 Posts Drives: 2016 F36 Join Date: Aug 2010 Location: Virginia iTrader: (0)	This guy did it... doesn't go into detailed specifics, but doesn't sound like a simple backdrop change. http://www.e90post.com/forums/showth...362673&page=12
	Appreciate 0 Quote

09-09-2010, 04:58 PM	#3
Noxious_ Banned 29 Rep 315 Posts Drives: 08 E90 Join Date: Feb 2010 Location: Canada iTrader: (4)	Ive heard its really hard and not worth it. Plus if you mention that on this forum you get a load of people telling you that you should just get a civic.
	Appreciate 1 Wolf 3352562.00 Quote

09-09-2010, 05:25 PM	#4
LuvMyRide Banned 319 Rep 1,842 Posts Drives: Bimmer Join Date: Feb 2009 Location: Planet iTrader: (8) Garage List 2006 E90 Xi [0.00]	Yes. I have.
	Appreciate 0 Quote

09-09-2010, 06:08 PM	#5
moto_noob Private First Class 3 Rep 149 Posts Drives: '06 e90 325i Join Date: Jun 2009 Location: Louisiana iTrader: (1)	I did it. Wasn't hard at all.
	Appreciate 0 Quote

09-10-2010, 10:48 AM	#6
mashimarho BimmerPost Supporting Vendor 2141 Rep 13,877 Posts Drives: E92 M3 & F80 M3 & G82 M4 Join Date: Mar 2010 Location: Lynnwood, WA iTrader: (45) Garage List 2021 BMW G82 M4 [0.00] 2011 BMW E92 M3 [0.00] 2015 BMW F80 M3 [0.00] 2012 BMW 335i xDrive [9.78]	well....?? pictures? suggestions?
	Appreciate 0 Quote

09-11-2010, 09:11 AM	#7
moto_noob Private First Class 3 Rep 149 Posts Drives: '06 e90 325i Join Date: Jun 2009 Location: Louisiana iTrader: (1)	done this just a few days ago. you'll need 12 smd leds, size 3528.
	Appreciate 0 Quote

09-11-2010, 09:44 AM	#8
cn555ic 460 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Me 2 Attached Images
	Appreciate 0 Quote

09-11-2010, 10:52 AM	#11
moto_noob Private First Class 3 Rep 149 Posts Drives: '06 e90 325i Join Date: Jun 2009 Location: Louisiana iTrader: (1)	1.) remove dash by unscrewing 2 torx screws at the top of the dash - move the steering wheel down as much as possible, then you'll be able to squeeze the dash out, no need to remove steering wheel 2.) unplug the dash harness located at the back of the dash 3.) there are 4 torx screws holding the dash together, next unclip the dash apart. 4.) use a flat head screwdriver, or something flat, to pry the needles out.remember to put like a playing card/paper between the needle and dash so you won't scratch it 5.) pull the dash apart. 6.) on the backside of the circuit board, around the needle pins, are the smd leds. there are 4 located around each large needle, and 2 around each small needle. 7.) unsolder the leds, remember to write down the direction of the smd, or you can just do it one at a time 8.)put the dash back together, but not the big window face. plug it back into your car 9.) (this is to get the needles back into the right position) do the 2.00 KI test, by press and hold the odometer reset button, then plugging in the key, and then press the odometer button til you get to 2.00 KI test. do the test. this will move the needles, after test is done, move the needles into proper position. do ki test again to see if the needles are moving correctly. 10. now put the face back on, then put dash back into car
	Appreciate 0 Quote

09-11-2010, 11:42 PM	#12
jesdan14 Captain 37 Rep 795 Posts Drives: 335i Coupe sapphire Black Join Date: Mar 2008 Location: Lakeworth Florida iTrader: (7) Garage List 2007 335I Coupe [0.00]	where did u get the leds from?
	Appreciate 0 Quote

09-11-2010, 11:54 PM	#13
dirtyylicous Swagger on a trillion 22 Rep 371 Posts Drives: IS300 Join Date: Jun 2008 Location: CT iTrader: (0)	I love the way this looks. I thought it would look weird with the rest of the orange but surprisingly it looks great! I was just wondering if anyone did all the lights in white. Just curious to see how itd look
	Appreciate 0 Quote

09-12-2010, 01:54 AM	#14
spdy330 Major General 535 Rep 6,148 Posts Drives: 05 Tundra, 15 FIT, 17 CRV Join Date: Dec 2009 Location: Chino Hills, CA iTrader: (163)	That does look good and would look better if everything else matched. __________________ If you will be purchasing ANY AT&T services online or in store could you mention that you were referred by me? My Employee Referral ID is eo4489. This would be a great help and it costs you nothing, thank you!
	Appreciate 0 Quote

09-12-2010, 01:50 PM	#15
moto_noob Private First Class 3 Rep 149 Posts Drives: '06 e90 325i Join Date: Jun 2009 Location: Louisiana iTrader: (1)	just ordered some smd leds off ebay. gonna change them out though, going to try to find ones a bit brighter
	Appreciate 0 Quote

09-12-2010, 06:43 PM	#16
g_rant Lieutenant Colonel 40 Rep 1,601 Posts Drives: F10 M5 Join Date: Aug 2010 Location: Bay Area, CA iTrader: (2)	any where else to get the LED lights? __________________
	Appreciate 0 Quote

09-13-2010, 12:43 AM	#17
doggiedog Captain 38 Rep 757 Posts Drives: 09 E90 335i 6MT SG/BL Join Date: Nov 2008 Location: Fort Lee, NJ iTrader: (0)	Does the cruise control light shine through the white light or does it get washed out?
	Appreciate 0 Quote

09-13-2010, 01:22 AM	#18
moto_noob Private First Class 3 Rep 149 Posts Drives: '06 e90 325i Join Date: Jun 2009 Location: Louisiana iTrader: (1)	Cruise control still shows
	Appreciate 0 Quote

09-20-2022, 11:11 AM	#19
purplerocket Registered 0 Rep 3 Posts Drives: f30, f06, e92 Join Date: Sep 2022 Location: greece iTrader: (0)	its very simple but you need soldering iron some pliers to remove needles and good quality leds from alliexpress they have brighter than original m3 dash. i can help you if you but there are a lot of videos on youtube for uninstall of dash. just be careful uninstalling needles and installing them not too much pressure cause you ca brake the motor and when you unsolder on led chip you install the new one on the same way
	Appreciate 0 Quote