MOST iPod install

bigjae1976 · 01-01-2008, 08:09 PM

How do you remove the pins from the ASK/CCC connector/radio harness? Do I have to take the blue tabs out?

Placey · 01-03-2008, 06:07 AM

yes, you have to slide the blue tab out of the holder to be able to gain access to the locking mechanism for the 2 pins that need to be switched over. then using a straight pic, or small screwdriver, you have to push on the locking mechanism of the pin while at the same time pulling on the wire to release it from the holder. do remove one pin and install the appropriate wire from the IPOD harness at a time, as to not mix them up.

BTW, this will need to be programmed when finished

bigjae1976 · 01-04-2008, 05:24 AM

Thanks for the info! Just pull on the fiber optic cables to remove them from the harness?

voltron1011 · 07-09-2008, 12:05 AM

Quote:

Originally Posted by Placey

BTW, this will need to be programmed when finished

I was able to find the cable here: http://www.trademotion.com/partlocat...catalogid=4462

Do you guys know of a better place to get it cheaper?

Also, how much did the dealer charge to program the car?

01-01-2008, 08:09 PM	#1
bigjae1976 Major General 1609 Rep 8,073 Posts Drives: 11 E90 M3 Individual Join Date: Mar 2006 Location: Houston, TX iTrader: (22) Garage List 2004 BMW M3 [6.33] 2011 BMW E90 M3 [6.83] 2013 BMW 328i [6.67]	MOST iPod install - removing pins from ASK/CCC How do you remove the pins from the ASK/CCC connector/radio harness? Do I have to take the blue tabs out? __________________ 2018 F30 320iX Melbourne Red 2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue
	Appreciate 0 Tweet Quote

01-03-2008, 06:07 AM	#2
Placey First Lieutenant 15 Rep 367 Posts Drives: 08 Z4 3.0SI Join Date: Feb 2007 Location: Upstate New York iTrader: (1)	yes, you have to slide the blue tab out of the holder to be able to gain access to the locking mechanism for the 2 pins that need to be switched over. then using a straight pic, or small screwdriver, you have to push on the locking mechanism of the pin while at the same time pulling on the wire to release it from the holder. do remove one pin and install the appropriate wire from the IPOD harness at a time, as to not mix them up. BTW, this will need to be programmed when finished
	Appreciate 0 Quote

01-04-2008, 05:24 AM	#3
bigjae1976 Major General 1609 Rep 8,073 Posts Drives: 11 E90 M3 Individual Join Date: Mar 2006 Location: Houston, TX iTrader: (22) Garage List 2004 BMW M3 [6.33] 2011 BMW E90 M3 [6.83] 2013 BMW 328i [6.67]	Thanks for the info! Just pull on the fiber optic cables to remove them from the harness? __________________ 2018 F30 320iX Melbourne Red 2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue
	Appreciate 0 Quote