So, I have the LCI adpative xenon hesdlights. My passenger lens got cracked and water ended up all in the electronics. The other day I took the lens off, fixed the cracked and carefully inspected each ballast and electronic for water damage. I replaced the xenon control unit (#9 in the diagram, guessing this is the igniter), the LED Modules (#13, I think these are for the angel eyes?), adaptive control unit (#10) and new bulbs. Now, the adaptive control light does not come on anymore so that was fixed. But some reason, I'm still getting errors for the low/high beam and angel eyes. When I switch the daytime control unit (#15) with the turn signal unit (#14), the angle eyes work and turn signal doesn't. So I know I need that module to fix the angel eyes. But, how come the low/high beam still won't work if I replaced all the modules for it? Is there something I need to do in WinKFP or Tool32 or something? Any ideas or thoughts welcome!
The component diagram for my headlights:
https://www.realoem.com/bmw/enUS/sho...diagId=63_1208
