|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Bmw E91 rear wiper not working
|
|
08-25-2022, 07:53 AM | #1 |
Private First Class
145
Rep 115
Posts |
Bmw E91 rear wiper not working
Today in the pi**ing rain discovered my rear wiper doesn't work any ideas what can cause this ?
__________________
If it?s Standard Modify it
|
08-25-2022, 12:18 PM | #2 |
Second Lieutenant
201
Rep 294
Posts |
Pivot seized up!?
Need to remove wiper arm, then circlip and free the spindle up. Clean, grease and refit. Had to do this twice to mine over the years.. |
Appreciate
2
LORDD145.00 StradaRedlands6468.50 |
08-25-2022, 12:28 PM | #3 |
Private First Class
145
Rep 115
Posts |
Ooooh I just checked fuses right wil have to try that does the inside cover need to come off for removal
__________________
If it?s Standard Modify it
|
Appreciate
0
|
08-25-2022, 12:38 PM | #4 |
Second Lieutenant
201
Rep 294
Posts |
No dont think so.
Unscrew the nut holding wiper arm on. Spray some WD40 around the circlip on spindle. Operate rear window wipe and see if spindle turns. Spray with more WD40 if need be. Upto you if you wanna strip in down further and clean/grease up after that. At least this will show you if it IS the problem first.. |
Appreciate
1
LORDD145.00 |
08-26-2022, 12:00 PM | #6 | |
Private First Class
145
Rep 115
Posts |
Quote:
__________________
If it?s Standard Modify it
|
|
Appreciate
0
|
08-26-2022, 12:02 PM | #7 |
Private First Class
145
Rep 115
Posts |
Is this what I need ?
__________________
If it?s Standard Modify it
|
Appreciate
0
|
12-27-2022, 10:07 AM | #9 |
Private First Class
145
Rep 115
Posts |
Right after having to angle grind the old one off as it was seized completely . The wiring plug from the boot got damaged . Can anyone give me the part number for this ? Or has a spare one ?
|
Appreciate
0
|
01-05-2023, 12:24 PM | #10 |
New Member
0
Rep 6
Posts |
most likely this is the wiring broken in the tailgate (where it goes into the roof) and nothing to do with the wiper motor or mechanism itself. If you also have non fucntioning boot safetly light or lights in the boot this would be a big indicatior this is the case. This kind of thing: https://www.e90post.com/forums/showthread.php?t=1677972
|
Appreciate
0
|
01-05-2023, 12:26 PM | #11 |
Private First Class
145
Rep 115
Posts |
If I connect the wires together the glsss will op and everything else works so I know it’s just the connector I need
__________________
If it?s Standard Modify it
|
Appreciate
0
|
02-27-2023, 08:37 AM | #12 | |
Brigadier General
3161
Rep 4,025
Posts |
Quote:
I think the right size is 10x1.2mm (12.4OD). At least it seemed to fit snugly on mine and the shaft is definitely 10mm. We'll see how long it lasts. Must have been getting worse for years, as I can't remember it ever going as fast as it does now! |
|
Appreciate
0
|
Bookmarks |
|
|