Alignment Question

kingcloudix · 02-01-2023, 04:23 PM

Hey everyone,

Took my car in for new front tires and an alignment.

Apparently the front camber is off and couldn't be adjusted fully. Does anyone know what the problem could be based on the readings? I attached the before and after measurements for reference.

trohde78 · 02-01-2023, 05:59 PM

Do you know the history of the vehicle? You may have the M3 control arms installed, which would be out of spec for a non-M car. And they are correct, the front camber is not adjustable. Stock camber is around -0.7, so this is actually better in my opinion.

kingcloudix · 02-02-2023, 07:12 PM

Quote:

Originally Posted by trohde78

Do you know the history of the vehicle? You may have the M3 control arms installed, which would be out of spec for a non-M car. And they are correct, the front camber is not adjustable. Stock camber is around -0.7, so this is actually better in my opinion.

Thank you for your input. Also asked a mechanic who works on BMWs frequently and he said its fine.

FormerRotor · 02-11-2023, 06:10 PM

Quote:

Originally Posted by trohde78

Do you know the history of the vehicle? You may have the M3 control arms installed, which would be out of spec for a non-M car. And they are correct, the front camber is not adjustable. Stock camber is around -0.7, so this is actually better in my opinion.

+1. Check to see if it still has the alignment pins (small silver pin on the strut tower by the strut mount bolts. If this isn’t there (just a small hole) it’s probably tell-tale that the previous owner did work to increase negative camber.

EDIT: I checked some old alignment notes, and we were running -1.1 up front on ours when we pulled the alignment pins (before installing the M3 control arms). This is likely where you are as well, though there may be some room for improvement on the L/R split there. If you have a desire for more negative camber, the m3 control arms are a great addition (especially if you have aged bushings anyway).

kingcloudix · 02-28-2023, 07:39 AM

Thanks for the suggestion. I was actually thinking about doing that for better handling overall since I'll need to replace turbos soon.

02-01-2023, 04:23 PM	#1
kingcloudix Second Lieutenant 35 Rep 251 Posts Drives: SG E92 Diego aka Silver Surfer Join Date: Nov 2015 Location: Hyattsville, MD iTrader: (0)	Alignment Question Hey everyone, Took my car in for new front tires and an alignment. Apparently the front camber is off and couldn't be adjusted fully. Does anyone know what the problem could be based on the readings? I attached the before and after measurements for reference. Attached Images
	Appreciate 0 Tweet Quote

02-01-2023, 05:59 PM	#2
trohde78 Captain 77 Rep 724 Posts Drives: 2007 335i 6MT, 2021 X5 M50i Join Date: Apr 2013 Location: Chicago Suburbs iTrader: (6)	Do you know the history of the vehicle? You may have the M3 control arms installed, which would be out of spec for a non-M car. And they are correct, the front camber is not adjustable. Stock camber is around -0.7, so this is actually better in my opinion.
	Appreciate 0 Quote

02-28-2023, 07:39 AM	#5
kingcloudix Second Lieutenant 35 Rep 251 Posts Drives: SG E92 Diego aka Silver Surfer Join Date: Nov 2015 Location: Hyattsville, MD iTrader: (0)	Thanks for the suggestion. I was actually thinking about doing that for better handling overall since I'll need to replace turbos soon.
	Appreciate 0 Quote