[Joe@TopGearSolutions]

Originally Posted by RuinE90d

I swapped e90 instrument clusters about a year ago but never had it coded. On Monday the mileage erroneously increased by 40k miles (I assume to reflect the donor car)! Obviously I want to restore the original mileage... I have read about the process but I don't want to attempt it. Please message me if you can help and are close to or in Knoxville.

If it wasn't copied to the CAS and/or DME, then it will be an easy fix. I have a POC who can replace the EEPROM (will require mailing cluster).

But, my fear is that it has copied to the CAS and DME. In that case, you'll end up paying dearly for it to be fixed... Nonetheless, you can shoot me a message and I can meet up with you to discuss in person.

[Kuzzo865]

bmw seems to hate me, traded a while back for my 06 325xi. still hate this car. bought an oem radio for it still doesnt work, drivers seat doesnt work either. also cant access the u2rad from ncsexpert or rheigold. so im at a loss with it. any ideals?

[Joe@TopGearSolutions]

Originally Posted by Kuzzo865

bmw seems to hate me, traded a while back for my 06 325xi. still hate this car. bought an oem radio for it still doesnt work, drivers seat doesnt work either. also cant access the u2rad from ncsexpert or rheigold. so im at a loss with it. any ideals?

Your radio should be old enough to access it through OBD. If you're local to Knoxville, we could try my ICOM.

[Kuzzo865]

Originally Posted by Joe@TopGearSolutions

Your radio should be old enough to access it through OBD. If you're local to Knoxville, we could try my ICOM.

the entire MOST is unable to communicate. There is no red light anywhere in any of the optical connections. Radio gets illumination power but wont power on or wake up the MOST system.

Also I live in Jefferson city but am not able to travel to knoxville.

[ckanderson]

Anyone in Nashville area that can help install a N55 downpipe? Not looking forward to doing it on my back in my driveway

[Longsmith]

Hey everyone. I'm here in Memphis Tennessee. Just got a 2008 335i. Then had catastrophic turbo failure. I'm going to have to stick real close to these fourms because $6500 later its still not completely repaired. I just ran out of money.

[freeheeler]

I'm new to the forum and trying to find someone reputable to help with my N54 here in Knoxville. Cats are clogged, wanting to go catless, will need a tuner and help with keeping the cel off. Also hopping someone local does intake walnut cleaning for a decent $. Any suggestions?

[npwanabe]

Hello all, I just got an '08 335i and discovered it needs injector work. Atlanta dealership quoted 3,500. There's lots of links to a local euro repair shop in Columbia and I think the guy's name is David Usilton, Jr. Anybody familar with him? I gotta feeling I'm going to need a reasonable bimmer tech for this engine! Thanks!!

[nashville_bill]

npwanabe,

I'm in Nashville. Did you get your injectors working?

Bill

[runnr548]

Ten minutes from Knoxvegas!

[Joe@TopGearSolutions]

Originally Posted by runnr548

Ten minutes from Knoxvegas!

Let me know if you ever need an ICOM or need to do some coding/flashing.

[swebb77]

I just got here and figured out how to find a Tennessee thread. I have a 2009 335i E90 with no power. I got from a repo sale and looking to find a thread where I could maybe get some insight on how to address my concerns. Any help is greatly appreciated!
Scott

[pbedrosi]

Before i post on general classified, would like to see if anyone local is interested. Tires in Nashville/Brentwood/Nolensville area.

Set of Michelin Pilot Super Sport performance tire set in great condition. Tires from E92 gen M3 staggered setup.
Rears 265/40-18 (x2)
Fronts 245/40-18 (x2)

https://nashville.craigslist.org/wto...316440330.html

[whyzee125]

Anybody know of a crimson red/oyster 09 335i in Tennessee? It has an m3 front bumper, M sport rear, and VMR wheels.

I wanted to buy it years ago and it got away but I've always been curious where it ended up

[Oldtech]

I'm New here and I have been trying to figure out my 06 325i. I bought it about a week ago and found oil in coolant reservoir. Changed filter adapter gasket and had to drill bolt out put a metal bolt back before I knew about the magnesium alloy material but I really think all these problems come from cracked adapter themselves. I've changed all the gaskets and anything I can think of has to do with coolant and oil. Anybody? Also that triangle is on my cluster

[Soravia]

Here is for Safelite Autoglass in Clarksville, but this could be anywhere.
Had my windshield replaced under insurance and the guy who replaced glass broke the windshield cowl (51717180743), threw away bottom windshield bottom moulding (51137133292) that holds the wiper washer cowl tight on the glass, and hid it all from me, while putting too much sealant so replacement windshield bottom moulding won't go back on.

Got my car interior flooded through the HVAC due to big hole in the wiper cowl.
Good thing I caught early before mold builds up and total the car.

Don't use Safelite Autoglass or anyone not properly trained on BMWs.

Here are the pictures.
New windshield bottom seal in picture was installed after a lot of cutting on the excessive sealant. Yes, two screws were intentionally left out so the cabin filter cover would seal better.

[whyzee125]

Originally Posted by Soravia

Here is for Safelite Autoglass in Clarksville, but this could be anywhere.
Had my windshield replaced under insurance and the guy who replaced glass broke the windshield cowl (51717180743), threw away bottom windshield bottom moulding (51137133292) that holds the wiper washer cowl tight on the glass, and hid it all from me, while putting too much sealant so replacement windshield bottom moulding won't go back on.

Got my car interior flooded through the HVAC due to big hole in the wiper cowl.
Good thing I caught early before mold builds up and total the car.

Don't use Safelite Autoglass or anyone not properly trained on BMWs.

Here are the pictures.
New windshield bottom seal in picture was installed after a lot of cutting on the excessive sealant. Yes, two screws were intentionally left out so the cabin filter cover would seal better.

Same thing happened to me but not by safelite. I'm convinced it's impossible to get anything done right in Tennessee. It's literally insane.

[tcphoto]

I realize that it's a year since anyone responded but I had the windshield on my E92 replaced by Jack Morris Glass here in Nashville and I was impressed. They came to my home and installed it in my garage in about an hour and for $350, it isn't OEM glass but it's also a fourteen year old car.

[runnr548]

Originally Posted by Joe@TopGearSolutions

Let me know if you ever need an ICOM or need to do some coding/flashing.

Will do!