![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
2e84 2E85 months after water pump replacement
![]() |
![]() |
05-30-2023, 03:05 AM | #1 |
Z4 35is
![]() 70
Rep 270
Posts |
2e84 2E85 months after water pump replacement
I got both Original thermostat and water pump replaced 4 months (~500 miles) ago with OEM parts and today car started overheating when oil temperature reached 250F on gauge.
-- DME active codes - 2E84 - BSD, message; electric coolant pump: Missing. 2E85 - BSD, message; electric coolant pump: Missing. Error comes back immediately after clearing them. Coolant doesnt run, even tried bleeding procedure. Also checked 2 fuses (passenger footwell). (And 50Amp fuse under the hood?) Fan starts running full speed as oil temperature approaches 250F and then car loses power Is this electric pump failing again? Or is it thermostat? Symptoms are slightly different from last time. Last time it failed, fan would go full speed and car would lose power within a mile. Now it goes until oil temperature gets to 250 and then loses power N54 2011 e89 Z4 35is 75k miles
__________________
2011 Z4 E89 35is
![]() Last edited by taranfx; 05-30-2023 at 03:24 AM.. |
![]() |
Bookmarks |
Tags |
coolant, pump |
|
|